Pretraživanje
Prikaz rezultata 3251-3260 od 3272
Metal pollution index as a tool for assessing water quality of Boka Kotorska Bay
(Belgrade : Faculty of Agriculture, 2013)
Image analysis as a useful tool for fast detection of dimensional and structural changes of poly(ethylene terephthalate) containers
(Savez hemijskih inženjera, Beograd, 2018)
The aim of this paper is to present image analysis as a useful technique for fast, reliable and non-destructive detection of dimensional and structural changes in polymers. The possibility of applying image analysis was ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
The influence of alumina crystal structures on the morphology and surface erosion of PMMA composite materials exposed to cavitation testing
(Elsevier Science Sa, Lausanne, 2019)
Composites are materials that reach many users and therefore, it is necessary to correlate the properties of every component on the behaviour of the material. Alumina is used as reinforcement with the aim of improving ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
Comparative analysis of mathematical models for supercritical extraction simulation from industrially valuable lamiaceae herbs
(Wiley, Hoboken, 2014)
The present study was aimed to compare different mathematical models used to simulate process of supercritical extraction from commercially important Lamiaceae herbs. Supercritical extractions with carbon dioxide from ...
The potential use of aby-6 starter culture in fermentation of soy based substrates
(Novi Sad : Institute of Food Technology, 2016)
The aim of this study was selection of optimal fermentation parameters (inoculum level and temperature) for production of fermented soy milk based beverage, using starter culture ABY-6 specially designed for yogurt production. ...
Utilization of agro-industrial waste for removal of copper ions from aqueous solutions and mining-wastewater
(Elsevier Science Inc, New York, 2019)
In this study, unmodified lemon peel, as agro-industrial waste, was used to investigate removal efficiency of copper ions from aqueous solutions and mining wastewater. The effects of solution pH, adsorption time, metal ion ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...