Претраживање
Приказ резултата 21-30 од 117
Synthesis and characterization of biodegradable aliphatic copolyesters with poly(ethylene oxide) soft segments
(Elsevier Ltd, 2008)
A series of multiblock poly(ether-ester)s based on poly(butylene succinate) (PBS) as the hard segments and hydrophilic poly(ethylene oxide) (PEO) as the soft segments was synthesized with the aim of developing degradable ...
Antimicrobial activity of celery fruit isolates and SFE process modeling
(Elsevier, Amsterdam, 2008)
Service life prediction for refractory materials
(Springer, New York, 2008)
Ultrasonic pulse velocity testing and image analysis were used to predict the thermal stability of cordierite-mullite refractories. Two compositions used as substrates in fast firing of porcelain whiteware, characterized ...
Estimation of single solute adsorption isotherms applying the nonlinear frequency response method using non-optimal frequencies
(Elsevier, Amsterdam, 2008)
In order to estimate single solute adsorption isotherms, the nonlinear frequency response (FR) of a chromatographic column is analyzed experimentally and evaluated using the concept of higher order frequency response ...
Use of nonlinear frequency response analysis for model discrimination: Example - DMFC anode kinetics
(18th International Congress of Chemical and Process Engineering, CHISA 2008, 2008)
Nonlinear frequency response analysis is proven as a powerful tool for the characterization of nonlinear systems. A set of frequency response functions (FRF), which contain different information, is obtained. In a number ...
Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger
(Versita, Warsaw, 2008)
The condensation heat transfer coefficient and the two-phase pressure drop of refrigerant R-134a in a vertical plate heat exchanger were investigated experimentally. The area of the plate was divided into several segments ...
Prediction of service life of cordierite-mullite refractory materials by non-destructive methods
(9th International Conference on Multiscale and Functionally Graded Materials, FGM IX, 2008)
Ultrasonic pulse velocity testing was used to perform non-destructive quality control of refractory plates used as substrates in fast firing of porcelain whitewares. The measurement of the ultrasonic velocity was used to ...
Comparison of different technologies for alginate beads production
(Springer International Publishing Ag, Cham, 2008)
This paper describes the results of the round robin experiment "Bead production technologies" carried out during the COST 840 action "Bioencapsulation Innovation and Technologies" within the 5th Framework Program of the ...
Method for determining refractory specimen heat resistance
(Springer, New York, 2008)
The most important properties governing the operation of refractories are refractoriness, service temperature and heat resistance. The heat resistance of specimens based on Al2O3 is determined by a standard laboratory ...
Influence of chain length and degree of branching of alcohol plus chlorobenzene mixtures on determination and modelling of V-E by CEOS and CEOS/G(E) mixing rules
(Elsevier Science Bv, Amsterdam, 2008)
The densities of binary mixtures of (1-propanol, or 1-butanol, or 2-butanol, or 1-pentanol+chlorobenzene) have been measured at temperatures 288.15, 293.15, 298.15, 303.15, 308.15 and 313.15 K and atmospheric pressure while ...