Претраживање
Приказ резултата 111-116 од 116
Fermentation of wheat and triticale hydrolysates: A comparative study
(Elsevier Sci Ltd, Oxford, 2009)
In bioethanol production four wheat varieties were investigated: NS 40S, Renesansa, Rapsodija and Dragana, as well as four triticale varieties: Oganj, Jutro, Odisej and NST 21/06. The samples were grinded and mixed with ...
A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The effect of thermal residual stresses in bimaterial structure with initial crack located near a sharp interface is discussed in this paper. Bimaterial compact tension (CT) specimen is used in the analysis, and the residual ...
Bioethanol production by immobilized Sacharomyces cerevisiae var. ellipsoideus cells
(African Journal of Biotechnology, 2009)
Bioethanol can be produced by fermentation of sugars from various waste agricultural materials. Whichever system for bioethanol production is chosen, the attention must be paid to the overall economics and energy consumption. ...
Properties of Cu-Al2O3 Powder and Compact Composites of Various Starting Particle Size Obtained by High-Energy Milling
(Savez inženjera metalurgije Srbije, 2009)
Copper-based composites were obtained using high energy milling. The inert gas-atomized prealloyed copper powder (average particle size - 30 μm) containing 2 wt.% Al, and the mixture of electrolytic copper powder (average ...
Comparative study of cu(2+) adsorption on a zeolite, a clay and a diatomite from Serbia
(Applied Clay Science, 2009)
The adsorption of a zeolite, clay and diatomite from Serbia toward aqueous Cu2+ ions was studied, at different pH. The adsorbents were characterized with respect to phase composition, specific surface area and point of ...
Micromechanical estimates of the critical values of j-integral for the steel of steam pipelines
(Springer, New York, 2009)
We analyze the level of damage to 14MoV63 steel for steam pipelines under the conditions of crack-growth initiation according to the mechanism of ductile fracture. The state of the material after service for about 100,000 ...