Претраживање
Приказ резултата 41-50 од 209
The effect of mould temperature and cooling conditions on the size of secondary dendrite arm spacing in Al-7Si-3Cu alloy
(Savez inženjera metalurgije Srbije, Beograd, 2009)
The secondary dendrite arm spacing (SDAS) is one of the most important microstructure features of as-cast structure in hypoeutectic aluminum alloys. The size of SDAS depends on many factors such as liquid metal treatment, ...
Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology
(Elsevier Science Sa, Lausanne, 2009)
The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium ...
Silver-Loaded Cotton/Polyester Fabric Modified by Dielectric Barrier Discharge Treatment
(Wiley-VCH Verlag Gmbh, Weinheim, 2009)
The preparation of antimicrobial silver-loaded cotton/polyester fabrics has been carried out by DBD surface activation followed by silver sorption from aqueous silver nitrate solution. A series of DBD fabric treatments was ...
The effect of the concentration of the reacting ion on the control of the electrodeposition process / Uticaj koncentracije reagujućeg jona na kontrolu procesa elektrohemijskog taloženja
(Serbian Chemical Society, Belgrade, 2009)
The effect of the concentration of the reacting ion on the nature of the control of the electrodeposition process was investigated by digital simulation of the polarization curve using the Newman form of the polarization ...
Kinetics of hexavalent chromium sorption on amino-functionalized macroporous glycidyl methacrylate copolymer
(Elsevier, Amsterdam, 2009)
Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), poly(GMA-co-EGDMA), with different porosity parameters were synthesized by suspension copolymerization and functionalized ...
Lipase-catalyzed synthesis of biodiesel in solvent-free system with different acyl acceptors
(Elsevier Science Bv, Amsterdam, 2009)
The analysis of different processes of extraction: yield of extracts obtained from Aloe vera (Aloe barbadensis Miller) and sweet bay (Laurus nobilis L.) and the exergy analysis of applied processes
(Association of the Chemical Engineers of Serbia, 2009)
The present study was aimed to investigate and compare the efficiency of different methods for the isolation extract from a plant material. Extracts from dried leaves of Aloe vera (A. barbadensis Mill.) and Sweet Bay (Laurus ...
The ultrasonic and image analysis method for non-destructive quantification of the thermal shock damage in refractory specimens
(Elsevier Sci Ltd, Oxford, 2009)
In the present work, Mg-exchanged zeolit and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 50:50. Samples were exposed to the water quench test from 950 ...
The problems in design and detailed analyses of energy consumption for biodiesel synthesis at supercritical conditions
(Elsevier, Amsterdam, 2009)
The main goal of this study is analysis the existing and recently published data related to design of larger scale plant for biodiesel synthesis at supercritical conditions. Such analysis was focused on the problem of ...
Development and application of crack parameters
(Springer, Dordrecht, 2009)
The development, definition and implementation of crack parameters (stress intensity factor, crack tip open displacement, J integral, filial stretch zone) are presented. They are now used for structural integrity and ...