Претраживање
Приказ резултата 31-40 од 247
The qualitative determination of oseltamivir phosphate in Tamiflu® capsule by cyclic voltammetry with simultaneous HPLC determination
(Serbian Chemical Society, Belgrade, 2010)
A gold electrode was applied in the voltammetric determination of oseltamivir phosphate standard in 0.05 M NaHCO3. Oseltamivir phosphate as a standard and as a component of Tamiflu capsule exhibited the identycal cyclic ...
Mechanism and kinetics of nanosilver formation by ultrasonic spray pyrolysis - Progress report after successful up-scaling (Part 1)
(Metall, 2010)
In 2006 the authors presented in METALL [Vol. 60, No. 6, pp. 377-382] first results on this promising new technology for nano-powder synthesis. Since then a significant improvement and up-scaling took place at IME Aachen ...
Effect of heating rate on precipitation of peak-aged Al-Li (8091) alloy: A quantitative approach
(Savez inženjera metalurgije Srbije, Beograd, 2010)
Samples of Al-Li (8091) alloy were solution treated at 540ºC for 30 min, water-quenched and continuously heated in oil at 0.05 and 0.1ºC/min rates, from room temperature to 190ºC when the peak hardness was achieved. Having ...
Pseudo-Blend Model of Hydrogel Immobilized Living Cells
(Amer Chemical Soc, Washington, 2010)
Living cell organization in clusters is considered in terms of cell-cells and cells-microenvironment interactions as important factor in fundamental understanding of cell behavior in formation and grow of living tissues, ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
The microwave-assisted synthesis of 5-arylazo-4,6-disubstituted-3-cyano-2-pyridone dyes
(Elsevier Sci Ltd, Oxford, 2010)
A novel protocol for the rapid synthesis of pyridone colorants under controlled microwave irradiation ill a dedicated reactor is described. Short reaction times, high isolated yields. and versatility for different substrates ...
Precipitation Processes in Al-Mg-(Mn,Cu) Type Alloy Sheets Evaluated Through Electrical Resistivity Variations
(Springer/Plenum Publishers, New York, 2010)
Precipitation/dissolution processes were followed by electrical resistivity variations in Al-Mg-(Mn)-Cu and Al-Mg-Mn type alloy sheets after different thermo-mechanical treatments (TMTs). In order to get an insight into ...
Influence of size scale and morphology on antibacterial properties of ZnO nanoparticles
(2010)
Poster presented at the 12th Annual Conference of the Materials Research Society of Serbia - YUCOMAT 2010, Herceg Novi, Montenegro, September 6–10, 2010
The influence of quantum effects on spatial distribution of carriers in surrounding-gate cylindrical MOSFETs
(Natl Inst Optoelectronics, Bucharest-Magurele, 2010)
The previously developed model describing quantum correction of carriers' concentration spatial distribution in ultra small MOS/MOD devices has been applied to Surrounding-Gate Cylindrical MOSFETs. The inevitable role of ...
Activated carbons obtained by pyrolyzing of resorcinol formaldehyde gels
(University of East Sarajevo, Faculty of Technology, 2010)
Activated carbon is used in different industrial domains due to highly developed specific surface area and its specific chemistry. Properties of activated carbons obtained by pyrolyzing formaldehyde gels are presented in ...