Претраживање
Приказ резултата 31-40 од 43
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography
(Amer Chemical Soc, Washington, 2011)
Inverse gas chromatography at infinite and finite surface coverages was applied to evaluate the surface properties of an iron-modified sepiolite sorbent, Fe-sepiolite. The adsorptions of different nonpolar and polar probes ...
Strain hardening of austenite in Fe-Cr-C-V alloys under repeated impact
(Elsevier Science Sa, Lausanne, 2011)
Structural changes were analyzed in Fe-Cr-C-V alloy balls with high chromium and different vanadium content, after repeated impact load testing. The results indicate that plastic deformation and strain hardening occur in ...
Effect of Alloy Purity on Fracture Behavior of Overaged 7000 Alloy Plates
(International Journal of Damage Mechanics, 2011)
The article deals with the relations between microstructural parameters, microscopic fracture mechanisms, and resultant plane-strain fracture toughness, K(IC), of hot-forged 7000 alloy plates in overaged condition. Three ...
Nb-TiO2 supported platinum nanocatalyst for oxygen reduction reaction in alkaline solutions
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Platinum based nanocatalyst at home made Nb-TiO2 support was synthesized and characterized as the catalyst for oxygen reduction reaction in 0.1 mol dm(-3) NaOH, at 25 degrees C. Nb doped TiO2 catalyst support, containing ...
Non-noble metal composite cathodes for hydrogen evolution. Part II: The Ni-MoO2 coatings electrodeposited from nickel chloride-ammonium chloride bath containing MoO2 powder particles
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
In this work the procedure of the deposition of composite Ni-MoO2 coatings onto Ni mesh from the nickel chloride-ammonium chloride electrolyte containing suspended MoO2 powder particles, under simulated industrial deposition ...
Optimization of electrolytic process of formation of open and porous copper electrodes by the pulsating current (PC) regime
(Elsevier Science Sa, Lausanne, 2011)
Optimization of process of formation of open and porous copper electrodes, denoted as the honeycomb-like ones, by the regime of pulsating current (PC) is considered. The square-waves PC were consisted of the same amplitude ...
Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
(Elsevier Sci Ltd, Oxford, 2011)
High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and ...
Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O
(IOP Publishing Ltd, Bristol, 2011)
Zinc oxide nanopowders were synthesized by the sol-gel method from an ethanol solution of zinc acetate dihydrate. Detailed structural and microstructural investigations were carried out using x-ray diffraction, Raman ...
Bucket wheel excavator Integrity assessment of the bucket wheel boom tie-rod welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The bucket wheel boom tie-rods are vital structural parts of the bucket wheel excavators (BWE) Their failures inevitably cause BWE collapse and are followed among other things by a substantial financial loss (millions of ...