Претраживање
Приказ резултата 81-87 од 87
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Whey as a raw material for the production of functional beverages / Surutka kao sirovina za proizvodnju funkcionalnih napitaka
(Association of Chemical Engineers of Serbia, 2012)
One of the least utilized by-products of food industry, despite the great potential that is described, is the whey, which is obtained as a by-product of the technological process production of cheese and casein. The excess ...
High Activity and Stability of Pt2Bi Catalyst in Formic Acid Oxidation
(Springer, New York, 2012)
Formic acid oxidation was studied on a new prepared Pt2Bi characterized by X-ray diffraction spectroscopy (phase composition), scanning tunneling microscopy (STM) (surface morphology), and COads stripping voltammetry ...
On the kinetics of the hydrogen evolution reaction on Ni-MoOx composite catalysts in alkaline solutions
(Belgrade : Serbian Chemical Society, 2012)
MoO3 particles were co-deposited with Ni onto smooth or rough Ni supports from modified Watt’s baths of different compositions. Morphology and composition of the electrodeposits were characterized by means of cyclic ...
Phase composition of Bi2O3 specimens doped with Ti, Zr and Hf
(Belgrade : Serbian Chemical Society, 2012)
Powder mixtures of α-Bi2O3 containing 2, 5 and 10 mole % of TiO2, ZrO2 or HfO2 were homogenized, heated at 820ºC for 24 h and quenched in air. X-ray powder diffraction technique was used to characterize the prepared samples. ...
Određivanje efektivnog koeficijenta difuzije prilikom sušenja uzoraka od gline / Calculation of the effective diffusion coefficient during the drying of clay samples
(Srpsko hemijsko društvo, Beograd, 2012)
Cilj ovog rada je da se na primeru dve opekarske gline sa različitih lokaliteta odredi efektivni koeficijenat difuzije na osnovu eksperimentalno snimljenih krivih sušenja. Razvijen je metod i napravljena su dva kompjuterska ...