Pretraživanje
Prikaz rezultata 1-10 od 74
Erosive wear resistance of silicon carbide-cordierite ceramics: influence of the cordierite content
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
A cordierite/SiC composite was created in situ with reactive sintering at 1250 degrees C and 1300 degrees C. The cordierite precursor was made from commercially available spinel, alumina and quartz and was mixed with the ...
Antibacterial and UV protective properties of polyamide fabric impregnated with TiO2/Ag nanoparticles
(Srpsko hemijsko društvo, Beograd, 2015)
The possibility of in situ photoreduction of Ag+ using colloidal TiO2 nanoparticles deposited on the surface of polyamide fabric in the presence of the amino acid alanine and methanol is discussed. The presence of TiO2/Ag ...
Experimental study of the thermodynamic and transport properties of binary mixtures of poly(ethylene glycol) diacrylate and alcohols at different temperatures
(Srpsko hemijsko društvo, Beograd, 2015)
Experimental density rho, refractive index n(D) and viscosity eta data of three binary systems of poly(ethylene glycol) diacrylate (PEGDA) + ethanol, + 1-propanol and + 1-butanol were measured at eight temperatures from ...
Recent development of bioaugmentation methods for tobacco wastewater treatment
(University of Babes-Bolyai, Cluj-Napoca, 2015)
In production of cigarettes a lot of tobacco waste, with nicotine, goes into the environment. Hence, there is a need for an economic and efficient method to diminish the discharge of hazardous materials from tobacco ...
Chemometric Study of the Antiproliferative Activity of Some New Hydantoin Derivatives: Assessment of Activity and Chromatographic Lipophilicity Data
(Soc Brasileira Quimica, Sao Paulo, 2015)
Cancer is the major health problem affecting the mankind of today. Most of the drugs used in traditional chemotherapy are very limited and the discovery of novel, more active, more selective and less toxic ones is still ...
Experimental investigation of heat transfer in three-phase fluidized bed cooling column
(Savez hemijskih inženjera, Beograd, 2015)
A three-phase (gas-liquid-solid) fluidized bed was used to study the heat transfer characteristics of a system consisting of low-density (290 kg/m(3)) spherical particles (2 cm diameter) in a 0.25 m cylindrical column with ...
Optimization of the synthesis of n-alkyl and n,n-dialkyl thioureas from waste water containing ammonium thiocyanate
(Savez hemijskih inženjera, Beograd, 2015)
The optimized methods for N-alkyl and N,N-dialkyl substituted thioureas synthesis starting from ammonium thiocyanates, waste water constituent from the production of tetramethylthiuram monosulfide (TMTS), and alkyl amine, ...
Electrochemical decolorization of the Reactive Orange 16 dye using a dimensionally stable Ti/PtOx anode
(Srpsko hemijsko društvo, Beograd, 2015)
The electrochemical decolorization of Reactive Orange 16 in a chloride containing solution was studied using a dimensionally stable Ti/PtOx anode. Different reaction parameters, agitation speed, applied current, sodium ...
Energy integration of nitric acid production using Pinch methodology / Energetska integracija proizvodnje azotne kiseline primenom Pinch metodologije
(Association of Chemical Engineers of Serbia, 2015)
Pinch methodology was applied to the heat exchangers network (HEN) synthesis of nitric acid production. The integration is analyzed in two ways, and the results are presented as two different solutions: i) the first solution ...
Synthesis and performance of polymer based magnetic composite sensing element
(Inst Materials Physics, Bucharest, 2015)
The commercial multi-mode optical fiber was coated with magnetic composite material prepared using Nd-Fe-B permanent magnet powder dispersed in poly (ethylene-co-vinyl acetate)-EVA. Characterization of microstructure, ...