Претраживање
Приказ резултата 31-40 од 381
Physical simulation of finish rolling of microalloyed steels in isothermal conditions / Simulacija završnog valjanja mikrolegiranog čelika u izotermalnim uslovima
(Association of the Chemical Engineers of Serbia, 2022)
The aim of this work was to establish a temperature of finish rolling stage of Nb/Ti microalloyed steel containing 0.06 wt.% C, 0.77 wt.% Mn, 0.039 wt.% Nb and 0.015 wt.% Ti, using physical simulation. Samples were subjected ...
Regeneration of the ciprofloxacin-loaded clinoptilolite by non-thermal atmospheric plasma
(Elsevier, 2022)
Natural clinoptilolite (CLI) exhibited a high efficacy in ciprofloxacin (CIP) removal from aqueous solution by adsorption. However, the regeneration of the spent adsorbent was a challenge since the adsorption occurred via ...
Manifestations of dynamic strain ageing in 2090 Al-Li alloy
(International Journal of Materials Research, 2022)
The manifestations of dynamic strain ageing in a commercial 2090 Al - Li alloy were investigated in a wide range of temperatures (-40 to 100 degrees C) and strain rates (4.16x10(-5) to 4.16x10(-3) s(-1) ). Serrated yielding, ...
Macrophages, the main marker in biocompatibility evaluation of new hydrogels after subcutaneous implantation in rats
(Journal of Biomaterials Applications, 2022)
Biocompatibility of materials is one of the most important conditions for their successful application in tissue regeneration and repair. Cell-surface interactions stimulate adhesion and activation of macrophages whose ...
Examination and optimization of lignocellulolytic activity of Stereum gausapatum F28 on beechwood sawdust supplemented with molasses stillage
(Journal of the Serbian Chemical Society, 2022)
This study provides a detailed analysis of the lignocellulolytic activity of a new isolate Stereum gausapatum F28, a Serbian autochthonous fungi, on beechwood sawdust supplemented with cheap waste, sugar beet molasses still ...
Gravimetric and instrumental methods comparison for experimental determination of carbonate carbon content in solid mineral fuels
(Thermal Science, 2022)
The content of combustible elements in solid mineral fuels (carbon, hydrogen, etc.) are very important, since they most directly affect the heat value. It should be noted that the fuel heat value depends on many other ...
Use of chènevotte, a valuable co-product of industrial hemp fiber, as adsorbent for copper ions: Kinetic studies and modeling
(Elsevier B.V., 2022)
In this study, a series of hemp shives (chènevotte) with different chemical compositions and properties, namely a raw (SHI-R), a washed with water (SHI-W), three samples chemically modified with KOH (SHI-OH), Na2CO3 (SHI-C) ...
Extraction of lyophilized olive mill wastewater using supercritical CO2 processes
(Alexandria Engineering Journal, 2022)
The olive growing in Tunisia has an economic dominance and agricultural importance. However, the huge extraction of olive oil generates a large quantity of olive mill wastewater (OMW), which is discharged to the surroundings. ...
Design and characterization of whey protein nanocarriers for thyme essential oil encapsulation obtained by freeze-drying
(Elsevier, 2022)
Innovative coating powders, based on whey protein concentrate (10–15 wt%) as native (WPC) or denatured protein (D-WPC), solely or in combination with alginate (0.75 wt%, AL), containing thyme essential oil, were produced ...
A Novel ceramic tubular membrane coated with a continuous graphene-TiO2 nanocomposite thin-film for CECs mitigation
(Chemical Engineering Journal, 2022)
This work presents a ceramic tubular membrane coated with a continuous graphene-TiO2 nanocomposite thin-film for contaminants of emerging concern (CECs) removal from synthetic and real matrices in single-pass flow-through ...