Претраживање
Приказ резултата 11-20 од 46
Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly (vinyl alcohol) solution
(Elsevier Sci Ltd, Oxford, 2013)
Alumina nanofibers are very suitable materials for use as reinforcement in a great variety of high performance composite materials. Nanosized alumina fibers were prepared from the aluminum chloride hydroxide/poly (vinyl ...
Spark plasma sintering of ZrC-SiC ceramics with LiYO2 additive
(Elsevier Sci Ltd, Oxford, 2013)
Spark plasma sintering (SPS) of ZrC-SiC composite powders in the presence of LiYO2 sintering additive was studied. The starting powders were obtained by a carbothermal reduction (CTR) of natural mineral zircon (ZrSiO4), ...
Core-shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis
(Elsevier, 2016)
For the first time, particle shape analysis of silica coated iron oxide (maghemite/magnetite) nanoparticle clusters (core-shell nanostructures) is discussed using computational methods. We analyzed three samples of core-shell ...
Highly ordered macroporous gamma-alumina prepared by a modified sol-gel method with a PMMA microsphere template for enhanced Pb2+, Ni2+ and Cd2+ removal
(Elsevier Sci Ltd, Oxford, 2017)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) gamma-alumina was investigated for enhanced Pb2+, Ni2+ and Cd2+ removal. The synthesis was based on a modified sol-gel method using a colloidal ...
Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings
(Elsevier Sci Ltd, Oxford, 2016)
The aim of the present study was to investigate the influence of substrate preheating on the structural properties of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. The deposition ...
Composite nanostructured hydroxyapatite/yttrium stabilized zirconia dental inserts - The processing and application as dentin substitutes
(Elsevier Sci Ltd, Oxford, 2018)
The objective of the study was to process nano-structured hydroxyapatite/yttrium-stabilized zirconia bioceramic and to investigate the possibilities of its application as dentin replacement in the form of dental inserts. ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2017)
A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long ...
Crystallization and sinterability of glass-ceramics in the system La2O3-SrO-B2O3
(Elsevier Sci Ltd, Oxford, 2014)
Glasses with a constant B2O3 and an increasing La2O3 content in the system La2O3-SrO-B2O3 were obtained by the usual melt quenching procedure. The crystallization and sinterability of the glasses were investigated by hot ...
Preparation and characterization of poly(vinyl butyral) electrospun nanocomposite fibers reinforced with ultrasonically functionalized sepiolite
(Elsevier Sci Ltd, Oxford, 2014)
This study presents an investigation of the effects of the processing conditions on the uniformity, morphology and structure of patterned nanofibrous mats of electrospun poly(vinyl butyral)/sepiolite (PVB/Sep) nanocomposite ...