Претраживање
Приказ резултата 11-20 од 56
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Sr,Mg co-doping of calcium hydroxyapatite: Hydrothermal synthesis, processing, characterization and possible application as dentin substitutes
(Ceramics International, 2022)
The aim of this study was to investigate the influence of binary Sr, Mg ion-doping compared to the single-ion doping effects on the phase composition and morphology of hydrothermally obtained calcium hydroxyapatite (HAP) ...
Tuning of BiFeO3 multiferroic properties by light doping with Nb
(Elsevier Sci Ltd, Oxford, 2018)
Bulk ceramic samples of BiFeO3 were light doped (up to 1%) with Nb5+ in the place of Fe3+ (B-site doping) and their multiferroic properties were investigated using XRD, SEM, polarization (PMTS) and magnetization (SQUID) ...
Influence of annealing treatment on magnetic properties of Fe2O3/SiO2 and formation of epsilon-Fe2O3 phase
(Ceramics International, 2017)
Magnetic properties of Fe2O3/SiO2 samples were studied after being produced by sol-gel synthesis and formation of epsilon-Fe2O3 polymorph. Samples were thermally treated, using different annealing temperatures and annealing ...
Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
(Elsevier Sci Ltd, Oxford, 2011)
High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and ...
Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method
(Elsevier Sci Ltd, Oxford, 2016)
The chemical synthesis of nickel manganite powder was performed by a complex polymerization method (CPM). The obtained fine nanoscaled powders were uniaxially pressed and sintered at different temperatures: 1000-1200 degrees ...
Estimate of Si3N4 diffusion into Cu based filler metal
(Elsevier Science Ltd, 2000)
The diffusion phenomena occurring at the boundary between Si3N4 and active Cu based filler metal during Si3Nn/metal joining are discussed as a part of the general theory of reaction layer growth. The mechanism of reaction ...
Thermal shock damage characterization of refractory composites
(Elsevier Sci Ltd, Oxford, 2008)
The possibility of using dolomite and bauxite for synthesis of high temperature castable was studied. Behavior of the material in conditions of rapid temperature changes was investigated. Water quench test was applied to ...
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...