Претраживање
Приказ резултата 1-10 од 32
Corrosion protection of aluminium pretreated by vinyltriethoxysilane in sodium chloride solution
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The corrosion protection of vinyltriethoxysilane (VTES) films on aluminium during exposure to 3% NaCl was investigated using electrochemical impedance spectroscopy (EIS), potential-time measurements and optical microscopy ...
Initial corrosion protection of Zn-Mn alloys electrodeposited from alkaline solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effects of a deposition current density (c.d.) on the corrosion behaviour of Zn-Mn alloy coatings, deposited from alkaline pyrophosphate solution, were investigated by atomic absorption spectrophotometry (AAS), X-ray ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents
(Pergamon-Elsevier Science Ltd, Oxford, 1996)
Organic protective coatings on steel were formed by cathodic electrodeposition of an epoxy resin modified by an amine and isocyanate using a constant voltage method (resin concentration 10% wt, temperature 26 degrees C, ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
Corrosion behaviour of epoxy coatings on modified aluminium surfaces
(Bulletin of Electrochemistry, 2002)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized phosphatized and chromatized-phosphatized aluminium) have been ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...