Pretraživanje
Prikaz rezultata 1-10 od 32
The effect of ceria and zirconia nanoparticles on the corrosion behaviour of cataphoretic epoxy coatings on AA6060 alloy
(Elsevier Science Sa, Lausanne, 2019)
In this work an attempt was made to produce epoxy coating doped with ceria (CeO2) and/or zirconia (ZrO2) nanoparticles, in single step electrophoretric deposition process. Deposition was carried out on AA6060 cataforetically ...
Cerium lactate as green corrosion inhibitor of AA2024 alloy
(John Wiley and Sons Inc., 2023)
This paper evaluated the inhibitory effect of Ce-chloride and Na-lactate mixture on the AA2024 aluminum alloy in 0.1 M NaCl solution. Electrochemical impedance spectroscopy (EIS) was applied for testing the general corrosion ...
Electrochemical behaviour of Ti-6Al-4V alloy with different microstructures in a simulated bio-environment
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
The electrochemical behaviour of the Ti-6Al-4V ELI alloy with different microstructures was investigated in Ringer's solution at 25 degrees C. It was found that the properties of both inner barrier and outer porous layers ...
Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
The electrochemical behaviour of the Ti-13Nb-13Zr and Ti-6Al-4V ELI alloys with martensitic microstructures was investigated by polarization and electrochemical impedance spectroscopy (EIS) in Ringer's solution. The impedance ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Electrodeposition and characterization of Zn-Ni alloys as sublayers for epoxy coating deposition
(Springer, Dordrecht, 2001)
The chemical composition and phase structure of Zn-Ni alloys obtained by electrodeposition under various conditions were investigated. The influence of the deposition solution and deposition current density on the composition, ...
Corrosion behaviour of epoxy coatings on modified aluminium surfaces
(Bulletin of Electrochemistry, 2002)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized phosphatized and chromatized-phosphatized aluminium) have been ...
The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents
(Pergamon-Elsevier Science Ltd, Oxford, 1996)
Organic protective coatings on steel were formed by cathodic electrodeposition of an epoxy resin modified by an amine and isocyanate using a constant voltage method (resin concentration 10% wt, temperature 26 degrees C, ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...