Pretraživanje
Prikaz rezultata 1-10 od 17
Determination of thermal shock resistance of silicon carbide/cordierite composite material using nondestructive test methods
(Elsevier Sci Ltd, Oxford, 2008)
In the present work Mg-exchanged zeolit and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70 and 50:50. Behavior of composite ceramics after thermal ...
Assessment of viscoelastic crack bridging toughening in refractory materials
(Elsevier Sci Ltd, Oxford, 2008)
Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance ...
Electrical properties of cordierite obtained by non-hydrolytic sol-gel method
(Elsevier Sci Ltd, Oxford, 2007)
Cordierite ceramic material, due to its properties such as low thermal expansion coefficient, low dielectric constant and high specific resistivity, could be used as an insulating material in high-frequency electronics. ...
Principal component analysis of morphological descriptors for monitoring surface defects induced by thermal shock
(Journal of the European Ceramic Society, 2021)
Pattern recognition techniques are applied to various morphological descriptors to monitor the formation and propagation of surface defects of materials subjected to thermal shock. A low-cement high-alumina castable was ...
Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition
(Elsevier Sci Ltd, Oxford, 2007)
Titanium and titanium alloys are widely used as materials for implants, because of their mechanical properties and nontoxic behaviour, but unfortunately, are bioinert. In order to solve this problem, the metal implant could ...
Nonlinear properties and stability of SnO2 varistors prepared by evaporation and decomposition of suspensions
(Elsevier Sci Ltd, Oxford, 2005)
SnO2 varistors doped with CoO, Cr2O3 and Nb2O5 were prepared by evaporation and decomposition of suspensions. The composition of the varistors was optimized to improve electrical properties, such as nonlinearity, leakage ...
Micromechanical properties of a hydroxyapatite/poly-L-lactide biocomposite using nanoindentation and modulus mapping
(Elsevier Sci Ltd, Oxford, 2007)
Biocomposites with ceramic fillers and polymer matrix are becoming attractive materials for bone tissue replacements. Nanoindentation has been used to locally characterize the surface mechanical properties of the ...
Implementation of image analysis on thermal shock and cavitation resistance testing of refractory concrete
(Elsevier Sci Ltd, Oxford, 2010)
This paper presents monitoring of changes during thermal shock and cavitation testing for low cement concrete that was synthesized and sintered at 1600 degrees C for 3h. Water quench test was applied as an experimental ...
Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
(Elsevier Sci Ltd, Oxford, 2015)
Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 ...
Cavitation resistance of refractory concrete: Influence of sintering temperature
(Elsevier Sci Ltd, Oxford, 2013)
The purpose of this study was to investigate possible application of refractory concrete in conditions of cavitation effect where the metal materials are usually applied. Also, influence of different sintering temperatures ...