Претраживање
Приказ резултата 21-30 од 207
The gas holdup in a multiphase reciprocating plate column filled with carboxymethylcellulose solutions / Утицај концентрације раствора и степена полимеризације карбоксиметилцелулозе на садржај гаса у реактору са вибрационом мешалицом
(Serbian Chemical Society, 2005)
Gas holdup was investigated in a gas-liquid and gas-liquid-solid reciprocating plate column (RPC) under various operation conditions. Aqueous carboxymethylcellulose (sodium salt, CMC) solutions were used as the liquid ...
On the kinetics of the hydrogen evolution reaction on zinc in sulfate solutions
(Belgrade : Serbian Chemical Society, 2001)
The kinetics and mechanism of the hydrogen evolution reaction (her) were studied on zinc in 1.0 mol dm-3 Na2SO4 at 298 K, in the pH range 4.4 - 10. It was found that a combination of classical potentiostatic steady-state ...
Pressure drop during evaporation of 1,1,1,2-tetrafluoroethane (R-134a) in a plate heat exchanger
(Serbian Chemical Society, 2007)
Experimental results for the pressure drop during the evaporation of the refrigerant 1,1,1,2-tetrafluoroethane (R-134a) in a vertical plate heat exchanger are presented in Ms paper. The influences of mass flux, heat flux ...
The surface energy of disperse cadmium electrodeposits formations / Површинска енергија електрохемијског формирања дисперзног талога кадмијума
(Serbian Chemical Society, 2005)
The surface energy of disperse cadmium electrodeposits formation was determined by using a procedure described earlier.1,2 It was shown that the surface energy strongly depends on the composition of the solution from which ...
Effect of non-stationary current regimes on the morphology of silver electrodeposits / Efekat nestacionarnih strujnih režima na morfologiju taloga srebra
(Serbian Chemical Society, Belgrade, 2009)
This work is concerned with the use of reverse current regimes in order to form small-grained and compact silver deposits during the electrorefining process. Several parameters were varied, i.e., i) anodic overpotential, ...
Mixtures of methanol and 2-propanol as a potential fuel for direct alcohol fuel cells / Smeša metanola i 2-propanola kao potencijalno gorivo u gorivim spregovima sa alkoholom
(Serbian Chemical Society, Belgrade, 2007)
The electrochemical oxidation of methanol, 2-propanol, and their mixtures was investigated on a Pt/C thin film electrode in acid solution. It was confirmed that the oxidation of 2-propanol commences at less positive ...
Acentric factor estimation from the corresponding states principle
(Serbian Chemical Society, 2006)
Acentric factor estimation from the corresponding states principle was conducted. The reported values, or analytical expressions, of the functions f(0), f(1) and f(2) are presented. The tabulated values of f(0), f(1) and ...
Prediction of the particle circulation rate in a draft tube spouted bed suspension dryer / Predviđanje cirkulacije čestica u sušioniku za suspenzije sa modifikovanim fontanskim slojem
(Serbian Chemical Society, 2006)
A model for predicting the particle circulation rate in a draft tube spouted bed dryer with inert particles is proposed and verified. The calculation algorithm requires three input values: the gas velocity in the draft ...
Methanol oxidation at platinum electrodes in acid solution: Comparison between model and real catalysts / Oksidacija metanola na platinskim elektrodama u kiseloj sredini - poređenje model i realnih katalizatora
(Serbian Chemical Society, Belgrade, 2006)
Methanol oxidation in acid solution was studied at platinum single crystals, Pt(hkl), as the model catalyst, and at nanostructural platinum supported on high surface area carbon, Pt/C, as the real catalyst. The linear ...
The effect of the particle shape and structure on the flowability of electrolytic copper powder. IV. The internal structure of the powder particles
(Journal of the Serbian Chemical Society, 2004)
The structure of powder particles was analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, ...