Претраживање
Приказ резултата 191-200 од 217
Kinetics and sintering mechanisms of hydro-thermally obtained hydroxyapatite
(Elsevier, 2008)
In this paper, the kinetics and sintering mechanism of hydro-thermally synthesized hydroxyapatite in the temperature range 900-1100 degrees C are presented. It was found that at 900 degrees C, the sintering process is very ...
Comparative study of cu(2+) adsorption on a zeolite, a clay and a diatomite from Serbia
(Applied Clay Science, 2009)
The adsorption of a zeolite, clay and diatomite from Serbia toward aqueous Cu2+ ions was studied, at different pH. The adsorbents were characterized with respect to phase composition, specific surface area and point of ...
Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition
(Elsevier, 2007)
Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average ...
The elusive metastable peak.
(Wiley-Blackwell, 2004)
Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings
(Elsevier, 2006)
In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology ...
Synthesis and characterization of MoOx-Pt/C and TiOx-Pt/C nano-catalysts for oxygen reduction
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The oxygen reduction reaction (ORR) was studied at carbon supported MoOx-Pt/C and TiOx-Pt nanocatalysts in 0.5 mol dm(-3) HClO4 solution, at 25 degrees C. The MoOx-Pt/C and TiOx-Pt/C catalysts were prepared by the polyole ...
Morphologies of copper deposits obtained by the electrodeposition at high overpotentials
(Elsevier, 2006)
Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higheroverpotentials were examined by the scanning electron microscopy (SEM) technique. ...
Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
(Elsevier, 2002)
Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were ...
Modelling of plasma activated CVD of Co-C-O layers in parallel plate reactor
(Elsevier, 2006)
A modelling procedure for Co-C-O layers generated on steel C35 from cobalt(II) acetylacetonate by PACVD is suggested. The investigations were carried out in a parallel plate reactor, under a radio frequency (13.56 MHz) ...
Micromechanical model for fracture toughness prediction in Al-Zn-Mg-Cu alloy forgings
(Taylor & Francis Ltd, Abingdon, 2008)
An attempt has been made to model the plane-strain fracture toughness, KIc, in Al-Zn-Mg-Cu alloy forgings subjected to overageing. The proposed model, based on the multiple micromechanisms, reveals the quantitative relations ...