Претраживање
Приказ резултата 1-10 од 49
Iron-Modified Sepiolite for Ni2+ Sorption from Aqueous Solution: An Equilibrium, Kinetic, and Thermodynamic Study
(Amer Chemical Soc, Washington, 2010)
Sepiolite was used for the synthesis of the sepiolite-iron oxide system to obtain a sorbent suitable for the removal of Ni2+ from aqueous solution. The modified material, Fe-sepiolite, was characterized by X-ray diffraction ...
Evaluation of alginate hydrogels under in vivo-like bioreactor conditions for cartilage tissue engineering
(Springer, Dordrecht, 2010)
Alginate hydrogels in forms of discs and packed beds of microbeads (similar to 800 mu m) were tested in a novel bioreactor at 10% strain using two regimes: at a loading rate of 337.5 mu m/s and at sequential increments of ...
The effect of the addition of colloidal iridium oxide into sol-gel obtained titanium and ruthenium oxide coatings on titanium on their electrochemical properties
(Royal Soc Chemistry, Cambridge, 2010)
Electrochemical properties of sol-gel processed Ti(0.6)Ir(0.4)O(2) and Ti(0.6)Ru(0.3)Ir(0.1)O(2) coatings on titanium substrate were investigated using cyclic voltammetry, polarization measurements and electrochemical ...
Thermal and optical properties of silver-poly(methylmethacrylate) nanocomposites prepared by in-situ radical polymerization
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
Surface modified silver nanoparticles dispersed in chloroform were encapsulated in poly(methylmethacrylate) (PMMA) by in-situ radical polymerization of methyl methacrylate initiated by 2,2'-azobisisobutyronitrile. The ...
Evaluation of periodic operation of a trickle-bed reactor based on empirical modeling
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
In this paper, we propose a new procedure for fast evaluation of the potential of periodic operations in trickle-bed reactors, based on empirical modeling. Step response experiments, with different input amplitudes, were ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Improved Properties of Oxygen and Argon RF Plasma-Activated Polyester Fabrics Loaded with TiO2 Nanoparticles
(Amer Chemical Soc, Washington, 2010)
The potentials of low-pressure capacitively coupled RF oxygen and argon plasmas for the activation of polyester fibers surface that can enhance the deposition of colloidal TiO2 nanoparticles were discussed. SEM and XPS ...
New Hybrid Properties of TiO2 Nanoparticles Surface Modified With Catecholate Type Ligands
(Springer, New York, 2010)
Surface modification of nanocrystalline TiO2 particles (45 ) with bidentate benzene derivatives (catechol, pyrogallol, and gallic acid) was found to alter optical properties of nanoparticles. The formation of the inner-sphere ...
Optimization Approach for Continuous Catalytic Regenerative Reformer Processes
(Amer Chemical Soc, Washington, 2010)
The new approach for simulation and optimization of a continuous catalytic regenerative (CCR) reformer process is proposed. Typical CCR reforming processes consist of three to four reactors with recycle. The reaction ...
Fast evaluation of periodic operation of a heterogeneous reactor based on nonlinear frequency response analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The concept of higher-order frequency response functions (FRFs), which is based on Volterra series representation of nonlineral systems, is used to analyse the time-average performance of a perfectly mixed reactor subject ...