Претраживање
Приказ резултата 31-40 од 140
Adsorption of Anthraquinone Dye AB111 from Aqueous Solution using Synthesized Alumina-Iron Oxide Doped Particles
(Science of Sintering, 2021)
Adsorption of anthraquinone dye Acid Blue 111 by alumina-iron oxide doped particles prepared by sol-gel method from aqueous solutions was studied. The adsorbent morphology was revealed by FESEM and the crystallographic ...
Electrophysical properties of woven polymer mesh fabrics
(Wiley, Hoboken, 2020)
The investigation was performed on three woven mesh fabrics made of polyethylene terephthalate (PET), polyamide (PA) 6.6 monofilaments, and PA 6.6 with carbon filament (CF). The dielectric properties were examined as ...
Evolution of Structural and Functional Properties of the Fe/BaTiO3 System Guided by Mechanochemical and Thermal Treatment
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
Multiferroic systems are attractive to the researches worldwide due to diversity of existing applications, as well as possible novel ones. In order to contribute to understanding of the processes that take place within the ...
A Textile-Based Microfluidic Platform for the Detection of Cytostatic Drug Concentration in Sweat Samples
(MDPI, Basel, 2020)
Featured Application Biomedical sector, sports sector-applications in the detection of drug concentrations in sweat samples. This work presents a new multilayered microfluidic platform, manufactured using a rapid and ...
Optimization of Methanol Synthesis under Forced Periodic Operation
(Processes, 2021)
Traditionally, methanol is produced in large amounts from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts under steady state conditions. In this paper, the potential of alternative forced periodic operation modes ...
The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass
(Science of Sintering, 2021)
The selected lithium germanium-phosphate glass was prepared by a conventional melt-quenching technique. The XRD method was employed to confirm the glass was obtained and to reveal crystalline phases during heat treatment. ...
Structure prediction, high pressure effect and properties investigation of superhard B6O
(IOP Publishing Ltd, Bristol, 2020)
Ab initio data mining approach has been used in order to investigate B6O system and discover new possible modifications, besides experimentally known R-3m (alpha-B6O) structure and theoretically predicted Cmcm (beta-B6O) ...
Valorization of Fly Ash from a Thermal Power Plant for Producing High-Performance Self-Compacting Concrete
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
This study analyzes the feasibility of valorizing industrial by-product, fly ash from a thermal power plant as a partial replacement of mineral filler-limestone for the production of self-compacting concrete (SCC). Three ...
Basalt-Polyester Hybrid Composite Materials for Demanding Wear Applications
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...
Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin
(Elsevier, Amsterdam, 2020)
In this study, development of folic acid-loaded liposomes using a basic amino acid, histidine as a solubilizing agent for folic acid was presented, which tackled the poor solubility of this vitamin. The effect of the ...