Претраживање
Приказ резултата 61-70 од 79
Micromechanical analysis of fatigue and crack growth in carbon-fiber epoxy composites based on mechanical testing
(Savez hemijskih inženjera, Beograd, 2020)
The paper presents static and dynamic tests of carbon/epoxy composite materials with fiber orientation at 0 degrees/90 degrees and +/- 45 degrees. The main tensile properties were determined as a basis for subsequent dynamic ...
Leaching of metastannic acid from e-waste by-products
(Springer, New York, 2020)
Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and ...
Adsorption performances and antimicrobial activity of the nanosilver modified montmorillonite clay
(Desalination Publ, Hopkinton, 2020)
The synthesis and adsorption potential of Cy-npAg, obtained by modification of raw montmorillonite clay (raw-Cy) with silver nanoparticle (npAg), was studied in this work. Optimization procedure, with respect to time, ...
Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution
(Desalination Publ, Hopkinton, 2020)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for ...
High temperature materials: properties, demands and applications
(Savez hemijskih inženjera, Beograd, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
High-temperature and high-pressure (p, rho, T) measurements and derived thermodynamic properties of 1-octyl-3-methylimidazolium hexafluorophosphate
(Srpsko hemijsko društvo, Beograd, 2020)
Densities of ionic liquid (IL) 1-octyl-3-methylimidazolium hexafluorophosphate [OMIM][PF6] at high temperatures and high pressures were measured. The measurements were made along 10 isotherms over a temperature range T = ...
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Polymer composite films and nanofibers doped with core-shell quantum dots
(Natl Inst Optoelectronics, Bucharest-Magurele, 2020)
Processing and characterization of polymer nanocomposites based on poly(methyl methacrylate) (PMMA) matrix with embedded core-shell CdSe/ZnS quantum dots were investigated. Nanocomposites were obtained via solution casting ...
Preparation and properties of hydrogen peroxide oxidized starch for industrial use
(Savez hemijskih inženjera, Beograd, 2020)
Oxidized starch, an additive used in paper manufacturing and products for construction industry, is usually produced using harmful oxidant, such as hypochlorites or periodates. In this study, a simple and efficient ...
Zinc oxide nanoparticles prepared by thermal decomposition of zinc benzenepolycarboxylato precursors: Photoluminescent, photocatalytic and antimicrobial properties / Наночестични прахови цинк-оксида добијени термичком деградацијом цинк-бензенполикарбоксилато прекурсора: фотолуминесцентна, фотокаталитичка и антимикробна својства
(Serbian Chemical Society, 2020)
Zinc oxide (ZnO) nanoparticles were obtained by thermal decomposition of one-dimensional zinc-benzenepolycarboxylato complexes as single-source precursors at 450 °C in an air atmosphere. The mechanism and kinetics of thermal ...