Pretraživanje
Prikaz rezultata 161-166 od 166
Micromechanical fracture analysis of laminated glass-epoxy composite material tested by bending / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog savijanjem
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The object and purpose of this work is the micromechanical analysis of failures caused by mechanical tests of laminate glass-epoxy composite material in bending. The structure of glass-epoxy composite material is a glass ...
Integrity assessment of vital beam components that enable conjoint operation of two bridge cranes
(Society for Structural Integrity and Life, Institute for Material Testing, 2018)
Vital components of the beam that enable conjoint operation of two bridge cranes are braces and threaded spindle. The beam connects two bridge cranes with overall lifting capacity of 500 t (2 x 250 t) and enables their ...
Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
(Society for Structural Integrity and Life, Institute for Material Testing, 2020)
Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken ...
Exergy concept and its implementation in the recycling of metals / Eksergijski koncept i njegova primena u recikliranju metala
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Modern industrial product design implies presence of many different materials. Consequently, in the recycling process, shredding and separation procedures are applied. However, all materials cannot be completely separated; ...
Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
(Savez inženjera metalurgije Srbije, Beograd, 2020)
Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to ...
Complex sulphide-barite ore leaching in ferric chloride solution
(Association of Metallurgical Engineers of Serbia, 2016)
The results of research on the leaching process of complex sulphide-barite ore were presented in this paper. The leaching process was carried out in a laboratory autoclave by ferric chloride solution. Considering that those ...