Претраживање
Приказ резултата 141-150 од 164
Characterization of plasma spray bioinert coating Al2O328wt.%MgO / Karakterizacija plazma sprej bioinertne prevlake Al2O328tež.%MgO
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
This paper presents the results of testing mechanical and structural characteristics of plasma spray coating Al2O328wt.%MgO. Metal oxide MgO in a complex oxide Al2O328wt.%MgO modifies the properties of Al2O3 ceramics by ...
Investigations of the possibilities of stillage utilization from the bioethanol production on corn / Ispitivanje mogućnosti korišćenja džibre iz proizvodnje bioetanola iz kukuruza
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2010)
Bioethanol produced by fermentation of biomass, such as sugar, starch, or lignocellulosic materials, is one of the most important renewable energy resources. An average thin stillage amount produced in the bioethanol process ...
Change of temperature and vertical force during friction stir welding / Promena temperature i vertikalne sile tokom procesa zavarivanja trenjem mešanjem
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The aim of this paper is to analyze changes of vertical force and temperature during friction stir welding process of high strength aluminum alloys (2024 T3). FSW process is a complex nonlinear process accompanied by large ...
Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants / Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
(Inženjersko društvo za koroziju, 2021)
The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...
Numerical simulation of constraint effect on fracture initiation in welded specimens using a local damage model / Numerička simulacija uticaja veze na inicijaciju loma kod zavarenih epruveta upotrebom modela lokalnog oštećenja
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
In this paper, two micromechanical models: the Gurson-Tvergaard-Needleman (GTN) model and Complete Gurson Model (CGM) are used to predict ductile fracture initiation of two different welded specimens, SE(B) and C(T). The ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
Production of lactic acid on liquid distillery stillage / Proizvodnja mlečne kiseline na tečnoj destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2011)
Bioethanol produced by fermentation of biomass is one of the most important renewable and ecologically friendly energy resources today. After bioethanol distillation a considerable amount of liquid stillage remains (1 hl ...
A model for cross-referencing and calculating similarity of metal alloys
(Association of Metallurgical Engineers of Serbia, 2013)
This paper presents an innovative model for the comparison and cross- referencing of metal alloys, in order to determine their interchangeability in engineering, manufacturing and material sourcing. The model uses a large ...
Crystallization support tube in a laboratory furnace
(University of Kragujevac, Faculty of Science, 2018)
Design of modular, simple to build and handle air cooler ('crystallization support tube') installed in a laboratory tube furnace is presented. The setup allows easy regulation and simultaneous crystallization tests of ...