Претраживање
Приказ резултата 1-10 од 39
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Thermoplastic Copolyester Elastomers
(Handbook of Engineering and Speciality Thermoplastics: Polyethers and Polyesters, 2011)
In this chapter the preparation, structure and properties of thermoplastic copolyester elastomers, TPEE, are presented. TPEEs are multiblock copolymers built up from so-called short crystallizable hard segments and long ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Composite nanostructured hydroxyapatite/yttrium stabilized zirconia dental inserts - The processing and application as dentin substitutes
(Elsevier Sci Ltd, Oxford, 2018)
The objective of the study was to process nano-structured hydroxyapatite/yttrium-stabilized zirconia bioceramic and to investigate the possibilities of its application as dentin replacement in the form of dental inserts. ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...
Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid
(Elsevier Science Sa, Lausanne, 2015)
The hydroxyapatite/graphene (HAP/Gr) composite was electrodeposited on Ti using the electrophoretic deposition process to obtain uniform bioactive coating with improved mechanical strength and favorable corrosion stability ...
Preparation, characterization and mechanical properties of Bi12SiO20-PMMA composite films
(Elsevier Science Sa, Lausanne, 2014)
This paper investigates processing and characterization of polymer composite material PMMA-Bi12SiO20 (BSO). Thin films of pure PMMA and composites with 0.5 and 1.0 wt% of Bi12SiO20 powder were made using solution casting ...
Antimicrobial P(HEMA/IA)/PVP semi-interpenetrating network hydrogels
(Springer, New York, 2013)
New semi-interpenetrating networks (semi-IPNHs) (P(HEMA/IA)/PVP) were prepared by free radical crosslinking copolymerization of 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA, 5 mol%), in the presence of poly(vinyl ...