Претраживање
Приказ резултата 1-10 од 39
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
(Springer, New York, 2020)
Composites based on poly(methyl methacrylate), dimethyl itaconate matrix and alumina particles were prepared. Ferrous oxide-doped alumina particles (Al2O3Fe) and commercial alumina nanoparticles (Al(2)O(3)n) modified with ...
Thermoplastic Copolyester Elastomers
(Handbook of Engineering and Speciality Thermoplastics: Polyethers and Polyesters, 2011)
In this chapter the preparation, structure and properties of thermoplastic copolyester elastomers, TPEE, are presented. TPEEs are multiblock copolymers built up from so-called short crystallizable hard segments and long ...
Antimicrobial P(HEMA/IA)/PVP semi-interpenetrating network hydrogels
(Springer, New York, 2013)
New semi-interpenetrating networks (semi-IPNHs) (P(HEMA/IA)/PVP) were prepared by free radical crosslinking copolymerization of 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA, 5 mol%), in the presence of poly(vinyl ...
Preparation, characterization and mechanical properties of Bi12SiO20-PMMA composite films
(Elsevier Science Sa, Lausanne, 2014)
This paper investigates processing and characterization of polymer composite material PMMA-Bi12SiO20 (BSO). Thin films of pure PMMA and composites with 0.5 and 1.0 wt% of Bi12SiO20 powder were made using solution casting ...
Multi-level finite element analysis for progressive damage behavior of HA/PEEK composite porous structure
(Elsevier Sci Ltd, Oxford, 2013)
A three-dimensional multi-level finite element (FE) modeling approach has been developed to simulate mechanical response and progressive damage behavior of hydroxyapatite/polyetheretherketone (HA/PEEK) porous structures ...
Quantitative evaluation of sulfur-polymer matrix composite quality
(Elsevier Sci Ltd, Oxford, 2013)
In order to predict service life of the sulfur polymer composite, the samples were subjected to the induced destruction using 10% hydrochloric acid solution. Control specimens were prepared using Portland cement binder. ...
Improvement of the mechanical properties of paper by starch coatings modified with sepiolite nanoparticles
(Wiley-VCH Verlag Gmbh, Weinheim, 2015)
The modern and rapidly developing paper and board industry requires more efficient agents for the surface of paper in order to improve the mechanical properties. The starch coating used for the reinforcement of schrenz ...