Претраживање
Приказ резултата 11-20 од 58
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Tailoring the corrosion resistance of Zn-Mn coating by electrodeposition from deep eutectic solvents / Poboljšanje korozione postojanosti Zn-Mn prevlake, elektrohemijskim taloženjem iz dubokih eutektičkih smeša
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Well adhered, homogenous coatings were obtained from deep eutectic solvents (DES) based on choline chloride and urea, at current densities up to 20 mA cm-2. The coatings' morphology was analyzed by atomic force microscopy, ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...
Time: Temperature superposition principle: Application of WLF equation in polymer analysis and composites / Princip superponiranja vremena i temperature - primena WLF jednačine za ispitivanje polimera i kompozita
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Polymers are the most studied viscoelastic material. The shorter times (high frequencies) corresponding to lower temperatures and long times (low frequencies) to high temperatures. This represents the quantitatively applied ...
Influence of acidic solutions on the strain distribution in glasspolyester composite pipes subjected to internal pressure / Uticaj rastvora kiselina na raspodelu deformacija kod staklo-poliestar kompozitnih cevi istaloženih dejstvu unutrašnjeg pritiska
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The basic subject of this paper was the determination of the strain distribution in glass-polyester composite pipes subjected to internal pressure. Firstly, the test was performed on virgin pipe segments (without the ...
Magnetic behaviour of hybrid magnetic composite materials / Magnetno ponašanje hibridnih magnetnih kompozitnih materijala
(Inženjersko društvo za koroziju, Beograd, 2014)
Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and ...
Basic principles and applications of photoelectrochemical reactions / Osnovni principi i primena fotoelektrohemijskih reakcija
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The paper discusses the basic principles of photoelectrochemistry and photo electrochemical reactions. Considered the application photoelectrochemicl cells in the conversion of the sun iradiation energy into electricity. ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...