Претраживање
Приказ резултата 11-20 од 60
Fired pressed pellet as a sample preparation technique of choice for an energy dispersive X-ray fluorescence analysis of raw clays
(Elsevier B.V., 2023)
In this paper, the main subject concerns comparing different techniques to prepare raw clay samples for energy-dispersive X-ray fluorescence spectrometry (EDXRF). Three kinds of sample preparation procedures are examined, ...
Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system
(Elsevier B.V., 2023)
This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high ...
Isotherm, Thermodynamic and Kinetic Studies of Elemental Sulfur Removal from Mineral Insulating Oils Using Highly Selective Adsorbent
(MDPI, 2023)
Elemental sulfur (S8) is a corrosive sulfur compound which was found to be extremely reactive to silver, causing intensive silver sulfide (Ag2S) deposition on on-load tap changer (OLTC) contacts in power transformers. A ...
Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials
(MDPI, 2023)
Polymer-bonded magnets are a class of composite material that combines the magnetic properties of metal particles and the molding possibility of a polymeric matrix. This class of materials has shown huge potential for ...
Carbon felt-polypyrrole-silver chloride composite as a rechargeable positive electrode for the seawater magnesium cell
(Elsevier Ltd., 2023)
In the paper, for the first time, the new concept of rechargeable cathode for Mg-based seawater cells is demonstrated. The pristine carbon felt (CF) is functionalized with electrodeposited polypyrrole (PPy), and the composite ...
Non-Destructive Examination for Cavitation Resistance of Talc-Based Refractories with Different Zeolite Types Intended for Protective Coatings
(MDPI, 2023)
In many industrial processes that include fluid flow, cavitation erosion of different engineeringstructures (pumps, turbines, water levels, valves, etc.) during their operation is expected. Metallic,ceramic, and composite ...
Effects of liquid surface tension on gas capillaries and capillary forces at superamphiphobic surfaces
(NLM (Medline), 2023)
The formation of a bridging gas capillary between superhydrophobic surfaces in water gives rise to strongly attractive interactions ranging up to several micrometers on separation. However, most liquids used in materials ...
Advancing PHBV Biomedical Potential with the Incorporation of Bacterial Biopigment Prodigiosin
(Switzerland : Multidisciplinary Digital Publishing Institute (MDPI), 2023)
The quest for sustainable biomaterials with excellent biocompatibility and tailorableproperties has put polyhydroxyalkanoates (PHAs) into the research spotlight. However, high productioncosts and the lack of bioactivity ...
Alginate Gel-Based Carriers for Encapsulation of Carotenoids: On Challenges and Applications
(MDPI, 2023)
Sodium alginate is one of the most interesting and the most investigated and applied biopolymers due to its advantageous properties. Among them, easy, simple, mild, rapid, non-toxic gelation by divalent cations is the most ...
Phenotypic Discovery of Thiocarbohydrazone with Anticancer Properties and Catalytic Inhibition of Human DNA Topoisomerase IIα
(MDPI, 2023)
Phenotypic screening of α-substituted thiocarbohydrazones revealed promising activity of 1,5-bis(salicylidene)thiocarbohydrazide against leukemia and breast cancer cells. Supplementary cell-based studies indicated an ...