Pretraživanje
Prikaz rezultata 11-20 od 132
Accumulation of heavy metal(loid)s and polycyclic aromatic hydrocarbons in the sediment of the Prahovo Port (Danube) and associated risks
(Springer Science and Business Media Deutschland GmbH, 2023)
The current study investigated the concentrations, possible sources, toxicity, and ecological risk of eight heavy metal(loid)s (As, Cd, Cr, Cu, Hg, Ni, Pb, Zn) and sixteen priority polycyclic aromatic hydrocarbons (PAHs) ...
Denture composite reinforced with short polyethylene terephthalate fibers
(John Wiley and Sons Inc., 2022)
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
Influence of Raster Angle on Tensile Properties of FDM Additively Manufactured Plates made from Carbon Reinforced PET-G Material
(Belgrade : Association for ETRAN Society, 2023)
Tensile properties of thin plate specimens made from short carbon fiberreinforced PET-G material are experimentally evaluated for various raster angles(printing directions). In additive manufacturing (AM), raster angle is ...
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
(Springer-Verlag, 2020)
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has beeninvestigated. Morphological and structural characteristics of this electrode type obtained by various ...
Investigation on the Adsorption of the Carbamate Pesticide Methomyl from Aqueous Solution using Modified Co-Beta Zeolite Particles
(International Institute for the Science of Sintering (IISS), 2023)
Adsorption of carbamate pesticide Methomyl by Co-Beta Zeolite particles prepared by wet ion-exchange method from aqueous solutions was studied. The effect of zeolite and pesticide concentrations, pH value, and sintering ...
Cavitation resistance of the material PA 3200 GF produced by selective laser sintering
(International Institute for the Science of Sintering (IISS), 2023)
The present study focuses on the results of cavitation resistance research of samples obtained by the Selective Laser Sintering technology. The samples were made from polyamide powder reinforced with glass beads – PA 3200 ...
Possibility of using ionizing radiation treated sludge from drinking water treatment plant as fertilizer in agriculture: Effects of aging
(Elsevier Ltd., 2023)
Using ionizing radiation in treating waste sludge from a drinking water treatment plant is a well-known technique. Sludge treated with ionizing radiation can be used as fertilizer in agriculture. In this paper, the effects ...
Untreated wastewater impact and environmental risk assessment of artificial sweeteners in river water and sediments of the Danube River Basin in Serbia
(Springer Science and Business Media Deutschland GmbH, 2023)
Artificial sweeteners are receiving increasing attention as newly recognized emerging contaminants that mainly reach the aquatic environment through the discharge of municipal wastewater containing large amount of these ...
Cascade luminescence and antibacterial behavior of fluorapatite nanopowder co-doped with Pr3+, NO3− and CO32− ions
(Springer, 2023)
In this study, luminescence and antibacterial behavior of pure fluorapatite (FAp) and praseodymium-nitrate-carbonate co-doped fluorapatite (PrNCFAp) nanopowders were investigated. Uniform nanopowders were synthesized by ...
Optimization of multiple fuel utilization options in Tri-generation systems
(Elsevier Ltd, 2023)
This work investigates the design of optimal tri-generation systems for heat, power and water production via multiple fuel selections, thus aiming to reduce the reliance on fossil fuel consumption. Generally speaking, ...