Претраживање
Приказ резултата 691-700 од 700
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
Investigation of different extraction procedures for the determination of major and trace elements in coal by ICP-AES and ion chromatography
(Srpsko hemijsko društvo, Beograd, 2016)
This paper presents the extraction of major and trace elements from a coal sample, in deionized water, by using three different extraction techniques. Rotary mixing and ultrasonic extraction were examined for different ...
New trends and challenges in lactic acid production on renewable biomass / Novi pravci i izazovi u proizvodnji mlečne kiseline na obnovljivim sirovinama
(Association of Chemical Engineers of Serbia, 2011)
Lactic acid is a relatively cheap chemical with a wide range of applications: as a preservative and acidifying agent in food and dairy industry, a monomer for biodegradable poly-lactide polymers (PLA) in pharmaceutical ...
Accumulation of trace metals in marine organisms of the southeastern Adriatic coast, Montenegro
(Serbian Chemical Society, 2012)
The concentration and accumulation of trace metals (Co, Ni, As, Cd, Pb and Hg) were measured in seawater, sediments and marine organisms on the coastline of Montenegro. The obtained results of trace metals in sea grass and ...
Water jet technology used in medicine
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2010)
Abrasive water jet technology has been recently used mainly in industrial areas. This technology provides several advantages in comparison with conventional methods. At present, it is used in medicine. This paper discusses ...
Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques
(Walter de Gruyter GmbH, 2015)
The Cu-7vol.%ZrB2 alloy examined in this study was consolidated via powder metallurgy (PM) processing by combining mechanical alloying and hot pressing. Powder mixture with composition: 94.78 wt.% copper, 4.1 wt.% zirconium, ...
Processing and properties of pure antiferromagnetic h-YMnO3
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2019)
Yttrium manganite (YMnO3) is widely investigated multiferroic material with potential use in many technological applications. In this paper, we report on the preparation and characterization of multiferroic hexagonal YMnO3 ...
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...
Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon
(Srpsko hemijsko društvo, Beograd, 2017)
Waste hemp (Cannabis sativa) fibers were used as sustainable and renewable raw materials for production of low-cost biocarbon sorbent for heavy metals removal. Carbon precursors of different chemical composition were ...