Претраживање
Приказ резултата 141-150 од 178
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Properties of Cu-Al2O3 Powder and Compact Composites of Various Starting Particle Size Obtained by High-Energy Milling
(Savez inženjera metalurgije Srbije, 2009)
Copper-based composites were obtained using high energy milling. The inert gas-atomized prealloyed copper powder (average particle size - 30 μm) containing 2 wt.% Al, and the mixture of electrolytic copper powder (average ...
Enzymatic lipophilization of vitamin C with linoleic acid: Determination of antioxidant and diffusion properties of L-ascorbyl linoleate / enzimska lipofilizacija vitamina C linolnom kiselinom - određivanje antioksidativnih i difuzionih svojstava L-askorbil-linolata
(Institute for Food Technology, Novi Sad, 2018)
Lipophilic derivatives of vitamin C are additives with antioxidant properties, attractive for application in food, cosmetics and pharmaceutics. They could be synthesized in lipase-catalyzed processes by using various acyl ...
New types of protective coatings and development of test methods / Nove vrste zaštitnih premaza i razvoj metoda ispitivanja
(Society for Structural Integrity and Life (DIVK), 2023)
The paper presents the results of synthesis and characterisation of refractory coatings based on various fillers
intended for the protection of metallic structures. Refractory
fillers applied are based on mullite, ...
Effect of the pH of artificial saliva on ion release from commercially pure titanium / Uticaj pH vrednosti veštačke pljuvačke na otpuštanje jona iz komercijalno čistog titana
(Faculty of Technology, Novi Sad, 2013)
Due to their excellent characteristics, such as chemical inertness, mechanical resistance, low Young's modulus, high corrosion resistance, and outstanding biocompatibility, titanium and its alloys are the most used metallic ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
(Savez inženjera metalurgije Srbije, Beograd, 2020)
Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to ...
COMPARATIVE CHEMOMETRIC ANALYSIS, RANKING AND SELECTION OF LIPOPHILICITY PARAMETERS OF 6-CHLORO-1,3,5-TRIAZINE DERIVATIVES WITH ACYCLIC AND CYCLIC SUBSTITUENTS
(University of Novi Sad, Faculty of Technology, 2022)
In the present paper, the chemometric analysis, ranking and selection of the most suitable in silico lipophilicity parameters of eight alkyl and cycloalkyl s-triazine derivatives were carried out. The lipophilicity parameters ...
Synthesis of novel wo3/zrsio4 catalysts for dehalogenation of halogenated hydrocarbons
(Savez inženjera metalurgije Srbije, Beograd, 2019)
This research aimed to develop a novel catalyst based on WO3/ZrSiO4 system for halogenated hydrocarbons processing. The production method of this catalyst involved extrusion and as such was simplified compared to thermo-chemical ...