Search
Now showing items 1-10 of 37
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
(Springer, New York, 2020)
Composites based on poly(methyl methacrylate), dimethyl itaconate matrix and alumina particles were prepared. Ferrous oxide-doped alumina particles (Al2O3Fe) and commercial alumina nanoparticles (Al(2)O(3)n) modified with ...
Preparation, characterization and mechanical properties of Bi12SiO20-PMMA composite films
(Elsevier Science Sa, Lausanne, 2014)
This paper investigates processing and characterization of polymer composite material PMMA-Bi12SiO20 (BSO). Thin films of pure PMMA and composites with 0.5 and 1.0 wt% of Bi12SiO20 powder were made using solution casting ...
Antimicrobial P(HEMA/IA)/PVP semi-interpenetrating network hydrogels
(Springer, New York, 2013)
New semi-interpenetrating networks (semi-IPNHs) (P(HEMA/IA)/PVP) were prepared by free radical crosslinking copolymerization of 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA, 5 mol%), in the presence of poly(vinyl ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Microstructure and mechanical properties of Al-4·4 wt-%Mg alloy (AA5182) after equal channel angular pressing
(Maney Publishing, 2005)
Equal channel angular pressing (ECAP) has been used to process an Al-4-4 wt-%Mg alloy (AA5182) at room temperature (RT), 200°C and 400°C. The evolution of microstructure and mechanical properties after ECAP has been studied ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...
Improvement of the mechanical properties of paper by starch coatings modified with sepiolite nanoparticles
(Wiley-VCH Verlag Gmbh, Weinheim, 2015)
The modern and rapidly developing paper and board industry requires more efficient agents for the surface of paper in order to improve the mechanical properties. The starch coating used for the reinforcement of schrenz ...