Претраживање
Приказ резултата 11-20 од 22
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, Belgrade, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production / Elektrohemijsko taloženje i karakterizacija Fe-Mo legura kao katoda za reakciju izdvajanja vodonika u industrijskom procesu proizvodnje hlorata
(Serbian Chemical Society, Belgrade, 2005)
Fe–Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Randomly oriented twin domains in electrodeposited silver dendrites
(Serbian Chemical Society, 2015)
Silver dendrites were prepared by electrochemical deposition. The structures of the Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM), Z-contrast high angle ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot–Lesage composite hardness model / ОДРЕЂИВАЊЕ АПСОЛУТНЕ ТВРДОЋЕ ЕЛЕКТРОЛИТИЧКИ ДОБИЈЕНИХ ПРЕВЛАКА БАКРА ПРИМЕНОМ CHICOT–LESAGE КОМПОЗИТНОГ МОДЕЛА ТВРДОЋЕ
(Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot––Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Effect of non-stationary current regimes on the morphology of silver electrodeposits / Efekat nestacionarnih strujnih režima na morfologiju taloga srebra
(Serbian Chemical Society, Belgrade, 2009)
This work is concerned with the use of reverse current regimes in order to form small-grained and compact silver deposits during the electrorefining process. Several parameters were varied, i.e., i) anodic overpotential, ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...