Претраживање
Приказ резултата 31-40 од 51
Synthesis and characterization of semi-interpenetrating networks of chitosan and poly(N-vinyl-2-pyrrolidone) / Sinteza i karakterizacija semi-interpenetrirajućih mreža hitozana i poli(N-vinil-2-pirolidona)
(Association of Chemical Engineers of Serbia, 2010)
Semi-interpenetrating networks (semi-IPNs) based on chitosan and poly(N-vinyl-2-pyrrolidone) were prepared in order to achieve better mechanical properties. The samples were characterized by FTIR, SEM, DMA analysis and the ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles
(MDPI, 2023)
This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable ...
Quality of Cotton and cotton/elastane Single Jersey Knitted Fabrics before and after Softening and in Situ Synthesis of Cu-based Nanoparticles
(Taylor and Francis Ltd., 2022)
The quality of cotton and cotton/elastane single jersey knitted fabrics before and after softening was evaluated through their mechanical properties, pilling, and volume electrical resistivity. Elastane-containing fabrics ...
Mechanical properties of two Al-Mg alloys manufactured by accumulative roll bonding (ARB) process
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2017)
The influence of alloying on the mechanical properties of AA5083 type Al-Mg
alloy sheets produced by accumulative roll bonding (ARB) process was studied.
Two investigated Al-Mg alloys: commercial AA5083 alloy with 4.2% ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Mechanical and magnetic properties of composite materials with polymer matrix
(Technical Faculty, Bor, 2010)
Many of modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Material property combinations and ranges have ...
Proučavanje uticaja metalnih vlakana na neka svojstva tehničkih pređa / Investigation of influence of metallic fibers on some properties of technical yarns
(Savez hemičara i tehnologa Srbije, 2000)
Ispitivana su neka mehanička i elektrofizička svojstva pređa formiranih od mešavine pamučnih i metalnih vlakana. Rezultati su upoređeni sa rezultatima dobijenim za pamučne pređe iste finoće. Registrovano je smanjenje ...