Претраживање
Приказ резултата 1-10 од 33
Optimization of multiple fuel utilization options in Tri-generation systems
(Elsevier Ltd, 2023)
This work investigates the design of optimal tri-generation systems for heat, power and water production via multiple fuel selections, thus aiming to reduce the reliance on fossil fuel consumption. Generally speaking, ...
Investigation on the Adsorption of the Carbamate Pesticide Methomyl from Aqueous Solution using Modified Co-Beta Zeolite Particles
(International Institute for the Science of Sintering (IISS), 2023)
Adsorption of carbamate pesticide Methomyl by Co-Beta Zeolite particles prepared by wet ion-exchange method from aqueous solutions was studied. The effect of zeolite and pesticide concentrations, pH value, and sintering ...
Influence of Raster Angle on Tensile Properties of FDM Additively Manufactured Plates made from Carbon Reinforced PET-G Material
(Belgrade : Association for ETRAN Society, 2023)
Tensile properties of thin plate specimens made from short carbon fiberreinforced PET-G material are experimentally evaluated for various raster angles(printing directions). In additive manufacturing (AM), raster angle is ...
Assessment of Life Quality in Children with Dysphonia Using Modified Pediatric Voice-Related Quality of Life Questionnaire in Serbia
(MDPI, 2023)
Background: Hoarseness is not uncommon in children, especially at school age, as communication with peers is intensified. It is caused by improper use or overuse of the vocal apparatus. (2) Methods: The study included 85 ...
Cavitation resistance of the material PA 3200 GF produced by selective laser sintering
(International Institute for the Science of Sintering (IISS), 2023)
The present study focuses on the results of cavitation resistance research of samples obtained by the Selective Laser Sintering technology. The samples were made from polyamide powder reinforced with glass beads – PA 3200 ...
Clinoptilolite—An Efficient Carrier for Catalytically Active Nano Oxide Particles
(MDPI, 2023)
Many efforts have been devoted to produce green materials and technology to prevent and minimize the adverse effects on the environment and human health caused primarily by population growth and industrial progress. Over ...
Deep Eutectic Solvent Based Reversed-Phase Dispersive Liquid–Liquid Microextraction and High-Performance Liquid Chromatography for the Determination of Free Tryptophan in Cold-Pressed Oils
(MDPI, 2023)
A fast and straightforward reversed-phase dispersive liquid–liquid microextraction (RP-DLLME) using a deep eutectic solvent (DES) procedure to determine free tryptophan in vegetable oils was developed. The influence of ...
Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics
(MDPI, 2023)
In this paper, raw jute fabric was subjected to atmospheric pressure dielectric barrier discharge (at 150 or 300 Hz) to enhance its wettability, i.e., capillarity and wetting time. Attenuated Total Reflectance-Fourier ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Preparation and Characterization of Geopolymers Based on Metakaolin with the Addition of Organic Phase PVA
(MDPI, 2023)
Geopolymers have excellent physical and mechanical properties, so they can be used as a substitute for ordinary polymers. Geopolymers are ceramic materials, which exhibit the property of brittleness, which can be a limitation ...