Претраживање
Приказ резултата 31-40 од 43
Metallurgical processing of copper secondary raw materials / Metalurška prerada sekundarnih sirovina bakra
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there are different ...
Following the ecological and economic effects of mining and metallurgical landfills / Prateći ekološko-ekonomski efekti metalurških i rudarskih deponija
(Savez inženjera i tehničara Srbije, Beograd, 2012)
In the process of refining raw materials and metal production in the metallurgical industry and mining are allocated a number of different secondary materials to be deposited. In the enrichment of the ore by flotation, in ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Adsorption study of cadmium ions on kaolinite modified by histidine and cysteine / Adsorpcija kadmijumovih jona na kaolinitu modifikovanim histidinom i cisteinom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Continuous development of new technologies leads to increasing pollution of water, thus creating the need for new materials that could be used in the processes of its purification. Therefore, adsorbents prepared from ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials / Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
(Savez inženjera i tehničara Srbije, Beograd, 2016)
Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of byproducts and ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Cavitation of refratory samples based on talc and domestic zeolite / Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this ...
Influence of whey proteins addition on mechanical stability of biopolymer beads with immobilized probiotics / Uticaj dodatka proteina surutke na mehaničku stabilnost biopolimernih nosača sa imobilisanim probioticima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Biopolymer carriers are widely used for immobilization of the bioactive compounds and different type of the cells. The aim of this study was to analyze influence of whey proteins addition on mechanical strength of Ca-alginate ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...