Претраживање
Приказ резултата 3411-3420 од 3479
Influence of the electrochemical anodization on the surface roughness of Ti-13Nb-13Zr medical alloy
(Univerzitet u Beogradu, Mašinski fakultet, 2021)
Surface roughness is one of the influencing factors on the friction and wear mechanism of metallic materials. However, surface roughness of metallic biomaterials plays a major role in assessing the biocompatibility and ...
Non-noble metal composite cathodes for hydrogen evolution. Part II: The Ni-MoO2 coatings electrodeposited from nickel chloride-ammonium chloride bath containing MoO2 powder particles
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
In this work the procedure of the deposition of composite Ni-MoO2 coatings onto Ni mesh from the nickel chloride-ammonium chloride electrolyte containing suspended MoO2 powder particles, under simulated industrial deposition ...
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Quantitative structure – property relationship studies of liquid chromatography – mass spectrometry responsiveness of aripiprazole and its impurities using artificial neural networks
(Université de LilleFaculté de Pharmecie de Lille, 2018)
The importance of studying electrospray ionization (ESI) technique stems from its widespread liquid
chromatography – mass spectrometry (LC-MS) character, particularly emphasized in scientific areas with most
of non-volatile ...
Treatment of heavy metals contaminated solid wastes-Stabilization
(4th European Metallurgical Conference, EMC 2007, 2007)
This paper presents investigation of possibility of heavy metals contaminated solid wastes treatment form Bor Site, Serbia. Presented remediation technology is stabilization, which can effectively reduce content of ...
A new method in designing compatibility and adhesion of EVA/PMMA blend by using EVA-g-PMMA with controlled graft chain length
(Springer, Dordrecht, 2018)
Atom transfer free radical polymerization (ATRP) was employed in a synthesis of graft polymer EVA-g-PMMAwith controlled length of side PMMA chains. Three steps of synthesis: partial hydrolysis of EVA, esterification with ...
Flow boiling of R134a and ammonia in a plate heat exchanger
(Elsevier Ltd, 2008)
This paper presents experimental results on evaporation heat transfer for flow boiling of ammonia and of R134a in a chevron-pattern corrugated plate heat exchanger (PHE). The measurements enable the evaluation of a quasi-local ...
STM image visualization of Si(111) 7 x 7 surface (graphic simulation and implementation)
(Elsevier Science Bv, Amsterdam, 2007)
The possibilities of graphic STM image simulation of a clean Si(1 1 1) 7 x 7 surface at atomic level are indicated. The presented procedure takes into account various types of deformation on the surface near the Fermi level ...
Fractographic analysis of fatigue damage in 7000 aluminium alloys
(The Royal Microscopical Society, 2008)
In this paper, an attempt is made to correlate the fatigue damage in 7000 aluminium alloys with different impurity contents to the microstructural features and to explain their interdependence through fractographic ...
Novel autochthonous fungi for the treatment of lignocellulosic biomass
(NTUA, 2022)
Lignocellulosic biomass has become one of the most explored renewable substrates for the production of many valuable chemicals, biofuels, and food or feed ingredients or products. However, a complex structure blocs its ...