Претраживање
Приказ резултата 1-10 од 41
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Synthesis and characterization of interpenetrating polymer networks with hyperbranched polymers through thermal-UV dual curing
(Elsevier Science Sa, Lausanne, 2008)
The aim of this study was to investigate the possibility of using acrylated hyperbranched polyesters (HBP) as UV curable component in dual curing automotive applications. Dual curing is one of possible ways to obtain fast ...
Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology
(Elsevier Science Sa, Lausanne, 2009)
The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium ...
Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2008)
The influence of hot-dip galvanized steel (HDG) surface pretreatment with phosphate coatings on the corrosion stability and adhesion characteristics of epoxy coatings electrodeposited on HDG steel was investigated. Phosphate ...
Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum
(Elsevier Science Sa, Lausanne, 2009)
Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic ...
The influence of polypyrrole films on the corrosion behavior of iron in acid sulfate solutions
(Elsevier Science Sa, Lausanne, 1998)
The corrosion behavior of mild steel covered by electrodeposited polypyrrole films was investigated by electrochemical impedance spectroscopy. Electrodeposition of polypyrrole was performed from an aqueous solution of ...
UV-curable hyperbranched urethane acrylate oligomers containing soybean fatty acids
(Elsevier Science Sa, Lausanne, 2005)
Urethane acrylate resins based on partially modified aliphatic hyperbranched polyesters (HBP) have been synthesized. HBP of the second and the third generation were synthesized from 2,2-bis(hydroxymethyl)propionic acid and ...