Претраживање
Приказ резултата 1-5 од 5
Porous acicular mullite obtained by controlled oxidation of waste molybdenum disilicide
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
Porous acicular mullite was fabricated by using waste MoSi2 heating element and Al2O3. Careful calcination of the pulverized heating element led to the formation of a mixture of MoO3 and amorphous SiO2. This mixture was ...
Iron-chromium-carbon-vanadium white cast irons: The microstructure and properties / Železo-hrom-ugljenik-vanadijum bela livena gvozđa - mikrostruktura i svojstva
(Association of Chemical Engineers of Serbia, 2014)
The as-cast microstructure of Fe-Cr-C-V white irons consists of M7C3 and vanadium rich M6C5 carbides in austenitic matrix. Vanadium changed the microstructure parameters of phase present in the structure of these alloys, ...
Microstructural properties and cavitation behavior of hypereutectic Al-Si alloy obtained by rheocasting process / Mikrostrukturna svojstva i kavitaciono ponašanje nadeutektičke Al-Si legure dobijene reokasting postupkom
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The purpose of this study was to investigate possible application of AlSi alloy produced by rheocasting process in cavitation conditions. A rheocasting process was used to refine the as cast microstructure and improve the ...
Solidification of Fe19Cr2.9C2V alloy
(University of Belgrade, Technical Faculty, Bor, 2014)
The addition of 2% V affects the solidification process and changes the transformation characteristics of austenite in hypoeutectic white cast iron containing 19% Cr and 2.9% C. DTA analysis reveals that vanadium reduces ...
Optimizing the content of nickel in flux-cored wire intended for welding micro-alloyed steels / Optimizacija sadržaja nikla u punjenoj žici namenjenoj za zavarivanje mikrolegiranih čelika
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
This paper presents the results related to organizing production of flux-cored wire alloyed with Ni and Mo according to standard AWS A5.29 intended for the MAG welding process. On the experimental line for steel strip ...