Претраживање
Приказ резултата 1-10 од 69
Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
(Taylor & Francis Inc, Philadelphia, 2017)
Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust ...
Optimization of Active Carbonaceous Material Obtained by Low Hydrothermal Carbonization of Plane Tree Seed with H3PO4
(Trans Tech Publications Ltd, Durnten-Zurich, 2017)
Activated carbons (ACs) were successfully prepared using plane tree seed (PTS) as a cheap and renewable raw material. The plane tree seeds were firstly treated combining magnetic (MM) and ultrasonic mixing (USM) during ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
Overview of Radiation Effects on Emerging Non-Volatile Memory Technologies
(Vinca Inst Nuclear Sci, 2017)
In this paper we give an overview of radiation effects in emergent, non-volatile memory technologies. Investigations into radiation hardness of resistive random access memory, ferroelectric random access memory, magneto-resistive ...
The effect of false-twist texturing parameters on the structure and crimp properties of polyester yarn
(Savez hemijskih inženjera, Beograd, 2017)
In this paper, the effect of false-twist texturing parameters (texturing speed, heater temperature, draw ratio and disc-to-yarn speed ratio (D/Y ratio)) on the structure and crimp properties of polyester yarn has been ...
Thermal Shock Properties of Glass-ceramics Synthesized From a Glass Frit
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this study, the behavior of glass-ceramics synthesized from a glass frit of FFW (Final Flotation Waste) originated from the RTB Bor Company was investigated. Thermal shock resistance was monitored in order to assess the ...
Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique
(Science of Sintering, 2017)
In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated ...
Targeting heat recovery and reuse in industrial zone
(Savez hemijskih inženjera, Beograd, 2017)
In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop ...
Corrosion of Mild Steel with Composite Alkyd Polyaniline-benzoate Coating
(Electrochemical Science Group, Beograd, 2017)
The synthesis of the polyaniline in the emeraldine salt form by the procedure suggested by IUPAC is successful preformed. Emeraldine salt form is deprotonated with ammonium hydroxide and reprotonated with benzoic acid. ...
Analysis of the treatment of plastic from electrical and electronic waste in the republic of Serbia and the testing of the recycling potential of non-metallic fractions of printed circuit boards
(Savez hemijskih inženjera, Beograd, 2017)
This paper presents the analysis of the quantity of plastic and waste printed circuit boards obtained after the mechanical treatment of electrical and electronic waste (E-waste) in the Republic of Serbia, as well as the ...