Pretraživanje
Prikaz rezultata 1-10 od 27
Formability of a high-strength Al Mg6.8 type alloy sheet
(Springer, New York, 1998)
Room temperature formability testing was performed on an AlMg6.8 type alloy sheet with a fully recrystallized structure (average grain diameter similar to 18 mu m) and after partial annealing with a retained deformed ...
Regulation of the crystallization in a crucible furnace
(Elsevier, Amsterdam, 1999)
A model of an air cooler ("cold finger") in a laboratory crucible furnace, for simultaneous regulation of scaling intervals of the crystallization rate in a series of Tamman test tubes with the purpose of obtaining crystals, ...
Palm oil hydrolysis by lipase from Candida cylindracea immobilized on zeolite type Y
(Elsevier Science Inc, New York, 1998)
Lipase from Candida cylindracea immobilized on hydrophobic zeolite type Y was used to hydrolyze palm oil in a microaqueous two-phase reaction system containing isooctane as organic medium and lecithin as surfactant. The ...
Corrosion behaviour of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloy
(Pergamon-Elsevier Science Ltd, Oxford, 1999)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on steel: phosphatised steel and steel previously modified by electrodeposited Zn-Ni alloy was investigated during exposure to 3% NaCl. The ...
Study of thermal stability of epoxy coatings electrodeposited on different substrates
(Elsevier Sci Ltd, Oxford, 1999)
The thermal stability of epoxy coatings electrodeposited on steel, phosphatized steel, steel electrochemically modified by Zn-Ni alloys and aluminium has been investigated. Epoxy coatings were formed by cathodic electrodeposition ...
Kinetics of lipase-catalyzed hydrolysis of palm oil in lecithin/izooctane reversed micellles
(Springer, New York, 1998)
Candida rugosa lipase has been used to investigate the hydrolysis of palm oil in a lecithin/isooctane reversed micellar system. The reaction obeys Michaelis-Menten kinetics for the initial conditions. Kinetic parameters ...
UPD of Cu on Pt(100): effects of anions on adsorption isotherms and interface structures
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
The results presented in this study show definitely that copper deposition in perchloric acid is a very slow, kinetically controlled process. In nearly halide free supporting electrolytes du appeared to be deposited at ...
The use of chitosan on hydrogen peroxide pretreated wool
(Amer Assoc Textile Chemists Colorists-Aatcc, Res Triangle Pk, 1998)
Since chlorination is known to produce substantial pollution with adsorbable organo halogens (AOX) in textile wastewater, shrink resist treatments like the widely used chlorine/Hercosett process are no longer environmentally ...
Hydridic and electrocatalytic properties of hypo-hyper-d-electronic combinations of transition metal intermetallic phases
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
Hydridic and electrocatalytic properties of hypo-hyper-d-electronic combinations of transition metals in their intermetallic phases and alloys for the hydrogen storage, hydridic batteries and its electrode reactions (HELR) ...
Underpotential deposition of lead onto Pt(100) in acid solutions: Adsorption isotherms and interface structures
(Royal Soc Chemistry, Cambridge, 1998)
The underpotential deposition (UPD) of Pb onto Pt(100) in pure perchloric acid and in solution containing Br- was examined by classical rotating ring disk electrode (RRDPt(100)E) electrochemical methods in combination with ...