Претраживање
Приказ резултата 1-10 од 69
Overview of Radiation Effects on Emerging Non-Volatile Memory Technologies
(Vinca Inst Nuclear Sci, 2017)
In this paper we give an overview of radiation effects in emergent, non-volatile memory technologies. Investigations into radiation hardness of resistive random access memory, ferroelectric random access memory, magneto-resistive ...
Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
(Taylor & Francis Inc, Philadelphia, 2017)
Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
The effect of false-twist texturing parameters on the structure and crimp properties of polyester yarn
(Savez hemijskih inženjera, Beograd, 2017)
In this paper, the effect of false-twist texturing parameters (texturing speed, heater temperature, draw ratio and disc-to-yarn speed ratio (D/Y ratio)) on the structure and crimp properties of polyester yarn has been ...
Optimization of Active Carbonaceous Material Obtained by Low Hydrothermal Carbonization of Plane Tree Seed with H3PO4
(Trans Tech Publications Ltd, Durnten-Zurich, 2017)
Activated carbons (ACs) were successfully prepared using plane tree seed (PTS) as a cheap and renewable raw material. The plane tree seeds were firstly treated combining magnetic (MM) and ultrasonic mixing (USM) during ...
Thermal Shock Properties of Glass-ceramics Synthesized From a Glass Frit
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this study, the behavior of glass-ceramics synthesized from a glass frit of FFW (Final Flotation Waste) originated from the RTB Bor Company was investigated. Thermal shock resistance was monitored in order to assess the ...
Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique
(Science of Sintering, 2017)
In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated ...
Formation of Porous Wollastonite-based Ceramics after Sintering With Yeast as the Pore-forming Agent
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
Dependence of Structural Characteristics of Polyamide Textured Yarns on the Parameters of the False Twist Yarn Texturing Process
(Inst Chemical Fibres, Lodz, 2017)
In the false twist texturing process, due to the action of mechanical forces and heat, a disorientation of structural elements happens at all levels of the supramolecular structure. These changes are related to changes in ...
The Application of Experimental Design Methodology for the Investigation of Liquid Radioactive Waste Treatment
(Vinca Inst Nuclear Sci, 2017)
The sorption properties of waste facade, brick, and asphalt sample towards Sr(II), Co(II), and Ni(II) ions from single and multicomponent solutions were investigated. The highest sorption capacity was found for Ni(II) ions, ...