Претраживање
Приказ резултата 1-10 од 16
Moisture absorption capacity of polyamide 6,6 fabrics surface functionalised by chitosan-based hydrogel finishes
(Elsevier Science Sa, Lausanne, 2011)
The present study aims at investigating the moisture absorption capacity of polyamide 6,6 fabrics when their surface is functionalised by chitosan-based hydrogels. For the finishing procedure, bulk hydrogels of chitosan ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder
(Elsevier Science Sa, Lausanne, 2011)
The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass ...
Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings
(Elsevier Science Sa, Lausanne, 2011)
The influence of steel surface pretreatment with different types of iron-phosphate coatings on the corrosion stability and adhesion characteristics of polyester coatings on steel was investigated. The phosphate coating was ...
Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates
(Elsevier Science Sa, Lausanne, 2012)
The properties of urethane acrylate resin mixtures based on the linear and hyperbranched aliphatic polyesters were examined. Linear polyester was synthesized from neopentil glycol and adipic acid. Hyperbranched polyester ...
The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environments
(Elsevier Science Sa, Lausanne, 2013)
The corrosion process of mild steel in the presence of benzoate-doped polyaniline coatings exposed to different environments (3% NaCl, atmosphere, and the Sahara sand) has been investigated. This system was also tested for ...
The use of nanoclay in preparation of epoxy anticorrosive coatings
(Elsevier Science Sa, Lausanne, 2014)
Epoxy/clay nanocomposites (NC) have become a very interesting topic among researchers in the past two decades because nanoclays have a positive effect on the mechanical, thermal and especially barrier and anticorrosive ...
Graphene-based antibacterial composite coatings electrodeposited on titanium for biomedical applications
(Elsevier Science Sa, Lausanne, 2015)
The graphene based silver/hydroxyapatite/graphene (Ag/HAP/Gr) composite coatings were produced by electrophoretic deposition (EPD) on titanium to assemble porous bioactive homogenous coatings, with improved corrosion ...
The protective properties of epoxy coating electrodeposited on Zn-Mn alloy substrate
(Elsevier Science Sa, Lausanne, 2015)
The epoxy coating was cataphoretically deposited on steel and steel modified by electroplated Zn-Mn alloy of different chemical contents. The samples were immersed in 0.5 mol dm(-3) NaCl solution for 60 days. The electrochemical ...