Претраживање
Приказ резултата 1-10 од 11
Metallurgical processing of copper secondary raw materials / Metalurška prerada sekundarnih sirovina bakra
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there are different ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Optimization of chitosan gel preparation for supercritical impregnation of thymol / Uticaj pripreme hitozan gelova na natkritičnu impregnaciju sa timolom
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The impregnation of differently prepared chitosan gels with thymol using supercritical carbon dioxide (scCO2) was studied in order to obtain new materials with added value without the use of organic solvents. The optimum ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Effect of tracers molecular weight on the release process from alginate microbeads / Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various ...
Analysis of catalyst wetting efficiency influence on performances of industrial TBR for hydro desulfurization and hydro de aromatization reactions / Analiza uticaja ovlaženosti katalizatora u industrijskom TBR reaktoru na reakcije hidrodesulfurizacije i hidrodearomatizacije
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Many industrial scale trickle bed reactors (TBR) operate at lower liquid superficial velocities ( lt 0.5 cm/s) at which the catalyst particle are not completely wetted. This phenomenon of incomplete wetting has therefore ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Influence of whey proteins addition on mechanical stability of biopolymer beads with immobilized probiotics / Uticaj dodatka proteina surutke na mehaničku stabilnost biopolimernih nosača sa imobilisanim probioticima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Biopolymer carriers are widely used for immobilization of the bioactive compounds and different type of the cells. The aim of this study was to analyze influence of whey proteins addition on mechanical strength of Ca-alginate ...
Quality, sources and balancing of iron and steel scrap / Kvalitet, izvori i bilansiranje otpadaka gvožđa i čelika
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Besides iron ore, the main raw material of iron and steel production is steel scrap. This paper presents the quality and sources of creation the iron and steel scrap and estimation of their creation in the future. The ...