Pretraživanje
Prikaz rezultata 1-10 od 1485
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part II. Influence of Particle Size on Percolation Threshold
(Esg, Belgrade, 2012)
This article is concerned with synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under ...
Characterization of New Structure for Silicon Carbide X-Ray Detector by Method Monte Carlo
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
This work presents a characterization of radiation absorption properties of silicon carbide (SiC) as semiconductor for the realization of detectors for X-rays. SiC detectors can potentially reach superior performance with ...
Investigation of the influential values about the use of the lead electrochemical system / Istraživanja uticajnih veličina na iskorišćenja olovnog elektrohemijskog sistema
(Društvo za sunčevu energiju "Srbija solar", Zrenjanin, 2010)
For the purpose of making a lead battery of the standard quality, characteristics of the exploitation depending on influential values, were tested: currents, temperatures and containing level of the antimony in electrode ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier Sci Ltd, Oxford, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Sorption of Cu2+ and Co2+ from aqueous solutions onto sepiolite: An equilibrium, kinetic and thermodynamic study / Sorpcija jona bakra i kobalta iz vodenih rastvora na sepiolitu, ispitivanje ravnoteže, kinetike i termodinamike sorpcije
(Serbian Chemical Society, Belgrade, 2011)
The efficiency of natural sepiolite for the removal of Cu2+ and Co2+ from aqueous solution was determined using the batch method. The sorption experiments were performed as a function of the initial metal concentration, ...
Quantification of viable spray-dried potential probiotic lactobacilli using real-time PCR
(Srpsko biološko društvo, Beograd, i dr., 2012)
The basic requirement for probiotic bacteria to be able to perform expected positive effects is to be alive. Therefore, appropriate quantification methods are crucial. Bacterial quantification based on nucleic acid detection ...
Intragranular ferrite morphologies in medium carbon vanadium-micro alloyed steel
(University of Belgrade, Technical Faculty, Bor, 2013)
The aim of this work was to determine TTT diagram of medium carbon V-N micro-alloyed steel with emphasis on the development of intragranular ferrite morphologies. The isothermal treatment was carried out at 350, 400, 450, ...
Lipases as biocatalysts for biodiesel production / Lipaze kao biokatalizatori u sintezi biodizela
(Association of Chemical Engineers of Serbia, 2010)
Lipases can be used for a variety of biotechnological applications: synthesis of fine chemicals, therapeutics, agrochemicals, cosmetics, flavors, biopolymers and biodiesel. Biodiesel is an alternative fuel for diesel engines ...
Antibacterial and UV protective properties of polyamide fabric impregnated with TiO2/Ag nanoparticles
(Srpsko hemijsko društvo, Beograd, 2015)
The possibility of in situ photoreduction of Ag+ using colloidal TiO2 nanoparticles deposited on the surface of polyamide fabric in the presence of the amino acid alanine and methanol is discussed. The presence of TiO2/Ag ...
The effect of false-twist texturing parameters on the structure and crimp properties of polyester yarn
(Savez hemijskih inženjera, Beograd, 2017)
In this paper, the effect of false-twist texturing parameters (texturing speed, heater temperature, draw ratio and disc-to-yarn speed ratio (D/Y ratio)) on the structure and crimp properties of polyester yarn has been ...