Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams
Само за регистроване кориснике
2014
Аутори
Nikolić, VesnaKamberović, Željko
Anđić, Zoran
Korać, Marija
Sokić, Miroslav
Maksimović, Vesna
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
A method of synthesizing Ni-based catalysts supported on alpha-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al2O3 catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the... sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method.
Кључне речи:
catalysts / nickel / ceramic foams / modification / aerosol process / catalytic propertiesИзвор:
International Journal of Minerals Metallurgy and Materials, 2014, 21, 8, 806-812Издавач:
- Springer, New York
Финансирање / пројекти:
- Иновативна синергија нус-продуката, минимизације отпада и чистије производње у металургији (RS-MESTD-Technological Development (TD or TR)-34033)
- Развој технолошких процеса прераде нестандардних концентрата бакра у циљу оптимизације емисије загађујућих материја (RS-MESTD-Technological Development (TD or TR)-34023)
DOI: 10.1007/s12613-014-0974-x
ISSN: 1674-4799
WoS: 000340094800009
Scopus: 2-s2.0-84924243463
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Nikolić, Vesna AU - Kamberović, Željko AU - Anđić, Zoran AU - Korać, Marija AU - Sokić, Miroslav AU - Maksimović, Vesna PY - 2014 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2685 AB - A method of synthesizing Ni-based catalysts supported on alpha-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al2O3 catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method. PB - Springer, New York T2 - International Journal of Minerals Metallurgy and Materials T1 - Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams EP - 812 IS - 8 SP - 806 VL - 21 DO - 10.1007/s12613-014-0974-x ER -
@article{ author = "Nikolić, Vesna and Kamberović, Željko and Anđić, Zoran and Korać, Marija and Sokić, Miroslav and Maksimović, Vesna", year = "2014", abstract = "A method of synthesizing Ni-based catalysts supported on alpha-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al2O3 catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method.", publisher = "Springer, New York", journal = "International Journal of Minerals Metallurgy and Materials", title = "Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams", pages = "812-806", number = "8", volume = "21", doi = "10.1007/s12613-014-0974-x" }
Nikolić, V., Kamberović, Ž., Anđić, Z., Korać, M., Sokić, M.,& Maksimović, V.. (2014). Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams. in International Journal of Minerals Metallurgy and Materials Springer, New York., 21(8), 806-812. https://doi.org/10.1007/s12613-014-0974-x
Nikolić V, Kamberović Ž, Anđić Z, Korać M, Sokić M, Maksimović V. Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams. in International Journal of Minerals Metallurgy and Materials. 2014;21(8):806-812. doi:10.1007/s12613-014-0974-x .
Nikolić, Vesna, Kamberović, Željko, Anđić, Zoran, Korać, Marija, Sokić, Miroslav, Maksimović, Vesna, "Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams" in International Journal of Minerals Metallurgy and Materials, 21, no. 8 (2014):806-812, https://doi.org/10.1007/s12613-014-0974-x . .