Pretraživanje
Prikaz rezultata 1-10 od 100
Modification of poly(methyl methacrylate) denture base materilas with diesters of itaconic acid / Modifikacija poli(metil metakrilatnih) materijala za baze zubnih proteza diestrima itakonske kiseline
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The aim of this work is to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain a higher degree of material biokompatibility. In the first part of this ...
Kinetic modeling and oprimization of fixed-bed reactor for Fischer-Tropsch synthesis
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Fischer-Tropsch synthesis (FTS) is a heterogeneously catalyzed chemical reaction in which a mixture of hydrogen and carbon-monoxide is converted into an array of hydrocarbon products. These products can be used as synthetic ...
Influence of agro-cellulose fibre based yarn structure on subsequent textile transformation and end-use properties / Uticaj strukture pređa na bazi agroceluloznih vlakana na njihovu dalju tekstilnu transformaciju i upotrebna svojstva
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2009)
In the past decades, the textile market was characterized by a wide range application of man-made fibres. The low-cost and efficient production of these fibres seems to be the main criterion. In addition to economics, some ...
Application of dextran from lactic acid bacteria for silver nanoparticles synthesis and edible coating production / Primena dekstrana iz bakterija mlečne kiseline za sintezu nanočestica srebra i proizvodnju jestivih filmova
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The scope of this doctoral dissertation is the isolation of dextran producing lactic acid bacteria from the water kefir grain and testing the possibility of the obtained dextran for silver nanoparticles synthesis and edible ...
The influence of modification methods on physico-chemical and sorption properties of sepiolite Umnoženo za odbranu. / Proučavanje uticaja različitih postupaka modifikacije na fizičko-hemijske karakteristike i sorpciona svojstva sepiolita
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The aim of this study was to investigate the influence of modification of natural sepiolite using: 3-mercaptopropyltrimethoxysilane (HS(CH2)3Si(OCH3)3), [3-(2- aminoethylamino)propyl]trimethoxysilane ((CH3O)3Si(CH2)3NH(CH2)2NH2)), ...
Production and characteristics of functional fermented whey based beverages / Proizvodnja i karakteristike funkcionalnih fermentisanih napitaka na bazi surutke
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Number of whey based products on the market is negligible compared to the number of fermented dairy products, which suggests that the improvement of the whey fermentation process could result in new unconventional products ...
Thermodynamic and transport properties of biodiesel and biodiesel and petro-diesel blends at high pressures. / Termodinamička i transportna svojstva biodizela i njihovih smješa sa dizel gorivom na visokim pritiscima
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In the doctoral dissertation the establishment of a new apparatus and the introduction of the procedure for the high pressure density measurements in the compressed liquid regions was presented. The operation of the apparatus ...
Surface modification of cellulose fibers using dielectric barrier discharge / Modifikovanje površine celuloznih vlakana primenom dielektričnog barijernog pražnjenja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the theoretical part of doctoral dissertation, the most significant literature data concerning cellulose structure and properties have been systematically reviewed. Special attention has been given to the possibilities ...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
Synthesis, characterization and application of undoped and doped nanostructured photocatalysts based on titanium(IV) oxide / Sinteza, karakterizacija i primena nedopiranih i dopiranih nanostrukturnih fotokatalizatora na bazi titan(IV)-oksida
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Titania (TiO2) due to its photocatalytic activity, chemical and biological inertness, resistance to chemical- and photo-corrosion, non-toxicity, and relatively low cost, is one of the most studied semiconductors for ...