Spherical assemblies of titania nanotubes generated through aerosol processing
Само за регистроване кориснике
2015
Аутори
Jovanović, Dragana J.Dugandžić, Ivan M.
Ćirić-Marjanović, Gordana N.
Radetić, Tamara
Ahrenkiel, Scott Phillip
Milosević, Olivera B.
Nedeljković, Jovan
Šaponjić, Zoran
Mančić, Lidija
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
We report on the possibility to build hierarchically organized three-dimensional (3D) titania spherical particles having high surface-to-volume-ratio, by aerosol processing of nanotubular building blocks. Morphology and crystal structure of titania based spherical assemblies, obtained in the temperature range from 150 to 650 degrees C, were characterized by means of scanning and transmission electron microscopy, x-ray powder diffraction and Raman spectroscopy. Initial shape of 1D building units, nanotubes, was well preserved in the spherical assemblies processed at 150 and 450 degrees C. Processing at 650 degrees C resulted in a collapse of the nanotubular building blocks and formation of the assemblies of irregularly shaped TiO2 nanoparticles. Structural analysis revealed several phase transitions in titania spherical assemblies in course with the temperature increase indicating possibility of in-situ phase composition adjustment during aerosol processing.
Кључне речи:
Ultrasonic techniques / Electron microscopy (TEM and SEM) / Raman spectroscopy and scattering / TiO2Извор:
Ceramics International, 2015, 41, 10, 14754-14759Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Материјали редуковане димензионалности за ефикасну апсорпцију светлости и конверзију енергије (RS-45020)
- Утицај величине, облика и структуре наночестица на њихова својства и својства нанокомпозита (RS-172056)
- Електропроводни и редокс-активни полимери и олигомери: синтеза, структура, својства и примена (RS-172043)
DOI: 10.1016/j.ceramint.2015.07.205
ISSN: 0272-8842
WoS: 000362919900107
Scopus: 2-s2.0-84939824949
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Jovanović, Dragana J. AU - Dugandžić, Ivan M. AU - Ćirić-Marjanović, Gordana N. AU - Radetić, Tamara AU - Ahrenkiel, Scott Phillip AU - Milosević, Olivera B. AU - Nedeljković, Jovan AU - Šaponjić, Zoran AU - Mančić, Lidija PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3052 AB - We report on the possibility to build hierarchically organized three-dimensional (3D) titania spherical particles having high surface-to-volume-ratio, by aerosol processing of nanotubular building blocks. Morphology and crystal structure of titania based spherical assemblies, obtained in the temperature range from 150 to 650 degrees C, were characterized by means of scanning and transmission electron microscopy, x-ray powder diffraction and Raman spectroscopy. Initial shape of 1D building units, nanotubes, was well preserved in the spherical assemblies processed at 150 and 450 degrees C. Processing at 650 degrees C resulted in a collapse of the nanotubular building blocks and formation of the assemblies of irregularly shaped TiO2 nanoparticles. Structural analysis revealed several phase transitions in titania spherical assemblies in course with the temperature increase indicating possibility of in-situ phase composition adjustment during aerosol processing. PB - Elsevier Sci Ltd, Oxford T2 - Ceramics International T1 - Spherical assemblies of titania nanotubes generated through aerosol processing EP - 14759 IS - 10 SP - 14754 VL - 41 DO - 10.1016/j.ceramint.2015.07.205 ER -
@article{ author = "Jovanović, Dragana J. and Dugandžić, Ivan M. and Ćirić-Marjanović, Gordana N. and Radetić, Tamara and Ahrenkiel, Scott Phillip and Milosević, Olivera B. and Nedeljković, Jovan and Šaponjić, Zoran and Mančić, Lidija", year = "2015", abstract = "We report on the possibility to build hierarchically organized three-dimensional (3D) titania spherical particles having high surface-to-volume-ratio, by aerosol processing of nanotubular building blocks. Morphology and crystal structure of titania based spherical assemblies, obtained in the temperature range from 150 to 650 degrees C, were characterized by means of scanning and transmission electron microscopy, x-ray powder diffraction and Raman spectroscopy. Initial shape of 1D building units, nanotubes, was well preserved in the spherical assemblies processed at 150 and 450 degrees C. Processing at 650 degrees C resulted in a collapse of the nanotubular building blocks and formation of the assemblies of irregularly shaped TiO2 nanoparticles. Structural analysis revealed several phase transitions in titania spherical assemblies in course with the temperature increase indicating possibility of in-situ phase composition adjustment during aerosol processing.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Ceramics International", title = "Spherical assemblies of titania nanotubes generated through aerosol processing", pages = "14759-14754", number = "10", volume = "41", doi = "10.1016/j.ceramint.2015.07.205" }
Jovanović, D. J., Dugandžić, I. M., Ćirić-Marjanović, G. N., Radetić, T., Ahrenkiel, S. P., Milosević, O. B., Nedeljković, J., Šaponjić, Z.,& Mančić, L.. (2015). Spherical assemblies of titania nanotubes generated through aerosol processing. in Ceramics International Elsevier Sci Ltd, Oxford., 41(10), 14754-14759. https://doi.org/10.1016/j.ceramint.2015.07.205
Jovanović DJ, Dugandžić IM, Ćirić-Marjanović GN, Radetić T, Ahrenkiel SP, Milosević OB, Nedeljković J, Šaponjić Z, Mančić L. Spherical assemblies of titania nanotubes generated through aerosol processing. in Ceramics International. 2015;41(10):14754-14759. doi:10.1016/j.ceramint.2015.07.205 .
Jovanović, Dragana J., Dugandžić, Ivan M., Ćirić-Marjanović, Gordana N., Radetić, Tamara, Ahrenkiel, Scott Phillip, Milosević, Olivera B., Nedeljković, Jovan, Šaponjić, Zoran, Mančić, Lidija, "Spherical assemblies of titania nanotubes generated through aerosol processing" in Ceramics International, 41, no. 10 (2015):14754-14759, https://doi.org/10.1016/j.ceramint.2015.07.205 . .