The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process
2016
Preuzimanje 🢃
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In order to accurately and reliably evaluate the cavitation erosion resistance of materials using a cavitating jet generator, the effects of the hydrodynamic parameters and the nozzle geometry on the erosion process were investigated. Since the behaviour of a high speed submerged cavitating jet is also depending on the working conditions; their influence is also discussed based on the evaluation of cavitation erosion process. The erosion rate was used as an indicator for cavitating jet behaviour. Specimens of commercial purity copper were subjected to high speed submerged cavitating jets under different initial conditions, for certain time periods. The force generated by jet cavitation is employed to initiate the erosion in surface. The tested specimens were investigated with a digital optical microscope and a profilometer. It was found that erosion becomes more pronounced with decreasing cavitation numbers, as well as with increasing exit jet velocities. The nozzle configuration and h...ydrodynamic parameters have strong influences on the erosion rate, eroded area and depth of erosion. A comparison between the obtained results explains some of the mechanisms involved in cavitation and erosion processes and their relation to the tested parameters. Mathematical expressions which combine these parameters with the erosion rate are obtained. These parameters are very important in order to control the cavitation as a phenomenon and also to control the performance of the cavitating jet generator.
Ključne reči:
Cavitation / Cavitating jet / Cavitation erosion / Vortex / ShearIzvor:
International Journal of Multiphase Flow, 2016, 83, 27-38Izdavač:
- Pergamon-Elsevier Science Ltd, Oxford
Finansiranje / projekti:
- Ministry of Science in Libya
- Libyan government
- Hungarian Academy of SciencesHungarian Academy of Sciences
DOI: 10.1016/j.ijmultiphaseflow.2016.03.005
ISSN: 0301-9322
WoS: 000376710400003
Scopus: 2-s2.0-84961879718
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Hutli, Ezddin AU - Nedeljković, Miloš S. AU - Radović, Nenad AU - Bonyar, Attila PY - 2016 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3418 AB - In order to accurately and reliably evaluate the cavitation erosion resistance of materials using a cavitating jet generator, the effects of the hydrodynamic parameters and the nozzle geometry on the erosion process were investigated. Since the behaviour of a high speed submerged cavitating jet is also depending on the working conditions; their influence is also discussed based on the evaluation of cavitation erosion process. The erosion rate was used as an indicator for cavitating jet behaviour. Specimens of commercial purity copper were subjected to high speed submerged cavitating jets under different initial conditions, for certain time periods. The force generated by jet cavitation is employed to initiate the erosion in surface. The tested specimens were investigated with a digital optical microscope and a profilometer. It was found that erosion becomes more pronounced with decreasing cavitation numbers, as well as with increasing exit jet velocities. The nozzle configuration and hydrodynamic parameters have strong influences on the erosion rate, eroded area and depth of erosion. A comparison between the obtained results explains some of the mechanisms involved in cavitation and erosion processes and their relation to the tested parameters. Mathematical expressions which combine these parameters with the erosion rate are obtained. These parameters are very important in order to control the cavitation as a phenomenon and also to control the performance of the cavitating jet generator. PB - Pergamon-Elsevier Science Ltd, Oxford T2 - International Journal of Multiphase Flow T1 - The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process EP - 38 SP - 27 VL - 83 DO - 10.1016/j.ijmultiphaseflow.2016.03.005 ER -
@article{ author = "Hutli, Ezddin and Nedeljković, Miloš S. and Radović, Nenad and Bonyar, Attila", year = "2016", abstract = "In order to accurately and reliably evaluate the cavitation erosion resistance of materials using a cavitating jet generator, the effects of the hydrodynamic parameters and the nozzle geometry on the erosion process were investigated. Since the behaviour of a high speed submerged cavitating jet is also depending on the working conditions; their influence is also discussed based on the evaluation of cavitation erosion process. The erosion rate was used as an indicator for cavitating jet behaviour. Specimens of commercial purity copper were subjected to high speed submerged cavitating jets under different initial conditions, for certain time periods. The force generated by jet cavitation is employed to initiate the erosion in surface. The tested specimens were investigated with a digital optical microscope and a profilometer. It was found that erosion becomes more pronounced with decreasing cavitation numbers, as well as with increasing exit jet velocities. The nozzle configuration and hydrodynamic parameters have strong influences on the erosion rate, eroded area and depth of erosion. A comparison between the obtained results explains some of the mechanisms involved in cavitation and erosion processes and their relation to the tested parameters. Mathematical expressions which combine these parameters with the erosion rate are obtained. These parameters are very important in order to control the cavitation as a phenomenon and also to control the performance of the cavitating jet generator.", publisher = "Pergamon-Elsevier Science Ltd, Oxford", journal = "International Journal of Multiphase Flow", title = "The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process", pages = "38-27", volume = "83", doi = "10.1016/j.ijmultiphaseflow.2016.03.005" }
Hutli, E., Nedeljković, M. S., Radović, N.,& Bonyar, A.. (2016). The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process. in International Journal of Multiphase Flow Pergamon-Elsevier Science Ltd, Oxford., 83, 27-38. https://doi.org/10.1016/j.ijmultiphaseflow.2016.03.005
Hutli E, Nedeljković MS, Radović N, Bonyar A. The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process. in International Journal of Multiphase Flow. 2016;83:27-38. doi:10.1016/j.ijmultiphaseflow.2016.03.005 .
Hutli, Ezddin, Nedeljković, Miloš S., Radović, Nenad, Bonyar, Attila, "The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process" in International Journal of Multiphase Flow, 83 (2016):27-38, https://doi.org/10.1016/j.ijmultiphaseflow.2016.03.005 . .
Related items
Showing items related by title, author, creator and subject.
-
Laboratory investigation of cavitation resistance of materials: Modified ultrasonically induced cavitation test method / Laboratorijsko istraživanje kavitacione otpornosti materijala - modificirana ultrazvučna metoda
Dojčinović, Marina; Đorđević, Vitomir (Savez inženjera metalurgije Srbije, Beograd, 2008) -
Cavitation resistance of turbine runner blades at the hydropower plant 'Djerdap'
Dojčinović, Marina; Arsić, Miodrag; Bošnjak, Srđan; Murariu, Alin; Malesević, Zoranka (Society for Structural Integrity and Life, Institute for Material Testing, 2017) -
Influence of the polymer matrix type on cavitation resistance of composites
Dojčinović, Marina; Pavlović, Marko; Jezdimirović, Slađana; Purić, Branka; Cvetković, Aleksandar (University of Novi Sad, Faculty of Technical Sciences, 2021)