The implementation of image analysis for the visualization of adhesion assessment of a composite film
Само за регистроване кориснике
2018
Аутори
Algellai, Ahmed A.Vuksanović, Marija M.
Tomić, Nataša
Marinković, Aleksandar
Obradović-Đuričić, Kosovka
Radojević, Vesna
Jančić-Heinemann, Radmila
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality.
Кључне речи:
Adhesion / Composite materials / Indentation and hardness / FTIR / Electron microscopyИзвор:
Materials Letters, 2018, 227, 25-28Издавач:
- Elsevier Science Bv, Amsterdam
Финансирање / пројекти:
DOI: 10.1016/j.matlet.2018.04.118
ISSN: 0167-577X
WoS: 000436420200007
Scopus: 2-s2.0-85046804016
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Algellai, Ahmed A. AU - Vuksanović, Marija M. AU - Tomić, Nataša AU - Marinković, Aleksandar AU - Obradović-Đuričić, Kosovka AU - Radojević, Vesna AU - Jančić-Heinemann, Radmila PY - 2018 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3868 AB - The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality. PB - Elsevier Science Bv, Amsterdam T2 - Materials Letters T1 - The implementation of image analysis for the visualization of adhesion assessment of a composite film EP - 28 SP - 25 VL - 227 DO - 10.1016/j.matlet.2018.04.118 ER -
@article{ author = "Algellai, Ahmed A. and Vuksanović, Marija M. and Tomić, Nataša and Marinković, Aleksandar and Obradović-Đuričić, Kosovka and Radojević, Vesna and Jančić-Heinemann, Radmila", year = "2018", abstract = "The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality.", publisher = "Elsevier Science Bv, Amsterdam", journal = "Materials Letters", title = "The implementation of image analysis for the visualization of adhesion assessment of a composite film", pages = "28-25", volume = "227", doi = "10.1016/j.matlet.2018.04.118" }
Algellai, A. A., Vuksanović, M. M., Tomić, N., Marinković, A., Obradović-Đuričić, K., Radojević, V.,& Jančić-Heinemann, R.. (2018). The implementation of image analysis for the visualization of adhesion assessment of a composite film. in Materials Letters Elsevier Science Bv, Amsterdam., 227, 25-28. https://doi.org/10.1016/j.matlet.2018.04.118
Algellai AA, Vuksanović MM, Tomić N, Marinković A, Obradović-Đuričić K, Radojević V, Jančić-Heinemann R. The implementation of image analysis for the visualization of adhesion assessment of a composite film. in Materials Letters. 2018;227:25-28. doi:10.1016/j.matlet.2018.04.118 .
Algellai, Ahmed A., Vuksanović, Marija M., Tomić, Nataša, Marinković, Aleksandar, Obradović-Đuričić, Kosovka, Radojević, Vesna, Jančić-Heinemann, Radmila, "The implementation of image analysis for the visualization of adhesion assessment of a composite film" in Materials Letters, 227 (2018):25-28, https://doi.org/10.1016/j.matlet.2018.04.118 . .