Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
Samo za registrovane korisnike
2018
Autori
Algellai, Ahmed A.Tomić, Nataša
Vuksanović, Marija M.
Dojčinović, Marina
Volkov-Husović, Tatjana
Radojević, Vesna
Jančić-Heinemann, Radmila
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based particles as a reinforcement on metallic surface was done using the microhardness testing method and compared to the contact angle. Composites are made with 1 wt %, 3 wt %, 5 wt % and 10 wt % of alumina based fillers. Films were subjected to the cavitation in order to evaluate the erosion resistance of the composite film on the metal. It is proved that the adhesion is improved with addition of the fillers while the cavitation resistance is improved up to 5 wt % of fillers.
Ključne reči:
Polymer-matrix composites (PMCs) / Adhesion / Microstructures / Electron microscopyIzvor:
Composites Part B-Engineering, 2018, 140, 164-173Izdavač:
- Elsevier Sci Ltd, Oxford
Finansiranje / projekti:
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-34011)
- Sinteza, procesiranje i karakterizacija nanostrukturnih materijala za primenu u oblasti energije, mehaničkog inženjerstva, zaštite životne stredine i biomedicine (RS-45012)
DOI: 10.1016/j.compositesb.2017.12.034
ISSN: 1359-8368
WoS: 000430770300019
Scopus: 2-s2.0-85038821521
Kolekcije
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Algellai, Ahmed A. AU - Tomić, Nataša AU - Vuksanović, Marija M. AU - Dojčinović, Marina AU - Volkov-Husović, Tatjana AU - Radojević, Vesna AU - Jančić-Heinemann, Radmila PY - 2018 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4040 AB - Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based particles as a reinforcement on metallic surface was done using the microhardness testing method and compared to the contact angle. Composites are made with 1 wt %, 3 wt %, 5 wt % and 10 wt % of alumina based fillers. Films were subjected to the cavitation in order to evaluate the erosion resistance of the composite film on the metal. It is proved that the adhesion is improved with addition of the fillers while the cavitation resistance is improved up to 5 wt % of fillers. PB - Elsevier Sci Ltd, Oxford T2 - Composites Part B-Engineering T1 - Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate EP - 173 SP - 164 VL - 140 DO - 10.1016/j.compositesb.2017.12.034 ER -
@article{ author = "Algellai, Ahmed A. and Tomić, Nataša and Vuksanović, Marija M. and Dojčinović, Marina and Volkov-Husović, Tatjana and Radojević, Vesna and Jančić-Heinemann, Radmila", year = "2018", abstract = "Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based particles as a reinforcement on metallic surface was done using the microhardness testing method and compared to the contact angle. Composites are made with 1 wt %, 3 wt %, 5 wt % and 10 wt % of alumina based fillers. Films were subjected to the cavitation in order to evaluate the erosion resistance of the composite film on the metal. It is proved that the adhesion is improved with addition of the fillers while the cavitation resistance is improved up to 5 wt % of fillers.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Composites Part B-Engineering", title = "Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate", pages = "173-164", volume = "140", doi = "10.1016/j.compositesb.2017.12.034" }
Algellai, A. A., Tomić, N., Vuksanović, M. M., Dojčinović, M., Volkov-Husović, T., Radojević, V.,& Jančić-Heinemann, R.. (2018). Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate. in Composites Part B-Engineering Elsevier Sci Ltd, Oxford., 140, 164-173. https://doi.org/10.1016/j.compositesb.2017.12.034
Algellai AA, Tomić N, Vuksanović MM, Dojčinović M, Volkov-Husović T, Radojević V, Jančić-Heinemann R. Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate. in Composites Part B-Engineering. 2018;140:164-173. doi:10.1016/j.compositesb.2017.12.034 .
Algellai, Ahmed A., Tomić, Nataša, Vuksanović, Marija M., Dojčinović, Marina, Volkov-Husović, Tatjana, Radojević, Vesna, Jančić-Heinemann, Radmila, "Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate" in Composites Part B-Engineering, 140 (2018):164-173, https://doi.org/10.1016/j.compositesb.2017.12.034 . .