The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating
Apstrakt
In this paper, structural and mechanical properties of APS - atmospheric plasma spray coating Al-12Si are presented. The aim of the research was the optimisation of the flow of powder to produce layers with optimal mechanical and structural properties that will be applied to the worn out parts of airplanes. Three groups of samples were produced, by utilising three powder feed rates: 30 g/min, 45 g/min and 60 g/min. Evaluation of layers' microhardness was done using HV0.3 method and the bond strength was determined by testing of tensile strength. Surface morphology of the deposited powder particles was examined on SEM (Scanning Electron Microscope). The microstructure of the coating with the best measured mechanical properties was subsequently examined in etched condition on optical microscope and SEM (in accordance with the standard PN 585005, Pratt & Whitney). Also, fracture morphology of this coating in deposited state was examined using SEM. It was found that powder feed control wit...h atmospheric plasma spraying can produce dense layers of Al-12Si coating with good bond strength.
Ključne reči:
Atmospheric plasma spraying (APS) / Al-12Si alloy microstructure / Hardness / Bond strengthIzvor:
Reviews on Advanced Materials Science, 2019, 58, 1, 75-81Izdavač:
- Walter de Gruyter Gmbh, Berlin
Finansiranje / projekti:
- Mikromehanički kriterijumi oštećenja i loma (RS-MESTD-Basic Research (BR or ON)-174004)
- Razvoj tehnologije izrade obloge i jezgra na bazi domaćih sirovina za proizvodnju specijalnih obloženih elektroda namenjenih za elektrolučno zavarivanje čelika (RS-MESTD-Technological Development (TD or TR)-34016)
DOI: 10.1515/rams-2019-0007
ISSN: 1606-5131
WoS: 000473689400008
Scopus: 2-s2.0-85067126126
Kolekcije
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Mrdak, Mihailo AU - Međo, Bojan AU - Veljić, Darko AU - Arsić, Miodrag AU - Rakin, Marko PY - 2019 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4237 AB - In this paper, structural and mechanical properties of APS - atmospheric plasma spray coating Al-12Si are presented. The aim of the research was the optimisation of the flow of powder to produce layers with optimal mechanical and structural properties that will be applied to the worn out parts of airplanes. Three groups of samples were produced, by utilising three powder feed rates: 30 g/min, 45 g/min and 60 g/min. Evaluation of layers' microhardness was done using HV0.3 method and the bond strength was determined by testing of tensile strength. Surface morphology of the deposited powder particles was examined on SEM (Scanning Electron Microscope). The microstructure of the coating with the best measured mechanical properties was subsequently examined in etched condition on optical microscope and SEM (in accordance with the standard PN 585005, Pratt & Whitney). Also, fracture morphology of this coating in deposited state was examined using SEM. It was found that powder feed control with atmospheric plasma spraying can produce dense layers of Al-12Si coating with good bond strength. PB - Walter de Gruyter Gmbh, Berlin T2 - Reviews on Advanced Materials Science T1 - The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating EP - 81 IS - 1 SP - 75 VL - 58 DO - 10.1515/rams-2019-0007 ER -
@article{ author = "Mrdak, Mihailo and Međo, Bojan and Veljić, Darko and Arsić, Miodrag and Rakin, Marko", year = "2019", abstract = "In this paper, structural and mechanical properties of APS - atmospheric plasma spray coating Al-12Si are presented. The aim of the research was the optimisation of the flow of powder to produce layers with optimal mechanical and structural properties that will be applied to the worn out parts of airplanes. Three groups of samples were produced, by utilising three powder feed rates: 30 g/min, 45 g/min and 60 g/min. Evaluation of layers' microhardness was done using HV0.3 method and the bond strength was determined by testing of tensile strength. Surface morphology of the deposited powder particles was examined on SEM (Scanning Electron Microscope). The microstructure of the coating with the best measured mechanical properties was subsequently examined in etched condition on optical microscope and SEM (in accordance with the standard PN 585005, Pratt & Whitney). Also, fracture morphology of this coating in deposited state was examined using SEM. It was found that powder feed control with atmospheric plasma spraying can produce dense layers of Al-12Si coating with good bond strength.", publisher = "Walter de Gruyter Gmbh, Berlin", journal = "Reviews on Advanced Materials Science", title = "The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating", pages = "81-75", number = "1", volume = "58", doi = "10.1515/rams-2019-0007" }
Mrdak, M., Međo, B., Veljić, D., Arsić, M.,& Rakin, M.. (2019). The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating. in Reviews on Advanced Materials Science Walter de Gruyter Gmbh, Berlin., 58(1), 75-81. https://doi.org/10.1515/rams-2019-0007
Mrdak M, Međo B, Veljić D, Arsić M, Rakin M. The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating. in Reviews on Advanced Materials Science. 2019;58(1):75-81. doi:10.1515/rams-2019-0007 .
Mrdak, Mihailo, Međo, Bojan, Veljić, Darko, Arsić, Miodrag, Rakin, Marko, "The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating" in Reviews on Advanced Materials Science, 58, no. 1 (2019):75-81, https://doi.org/10.1515/rams-2019-0007 . .