Приказ основних података о документу

dc.creatorPavlović, Marko
dc.creatorDojčinović, Marina
dc.creatorProkić-Cvetković, Radica
dc.creatorAndrić, Ljubiša
dc.date.accessioned2021-03-10T14:10:21Z
dc.date.available2021-03-10T14:10:21Z
dc.date.issued2019
dc.identifier.issn0350-820X
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/4304
dc.description.abstractThe paper analyzes the morphology of cavitation damage of raw and sintered basalt samples. The experiment was conducted using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. During the determination of the resistance to the effect of cavitation, a change in the mass of samples was observed in the function of the cavitation time of operation. The morphology of damage caused by the effect of cavitation was followed by scanning with an electron microscope, and the level of degradation of the surface of the samples was quantified using the image analysis. The results showed a significantly higher degree of resistance of sintered basalt, with a cavitation rate of 0.019 mg/min relative to raw basalt, with a cavitation rate of 0.738 mg/min. After 120 minutes of exposure to the cavitation effect, a smaller number of small pits on the surface of sintered basalt were observed, while a higher level of damage to the surface with the appearance of numerous pits was found in raw basalt, which can be connected in some places to larger and deeper pits in some places. The obtained results indicate the possibility of using sintered basalt for the production of parts that will be exposed to the effects of high cavitation loads.en
dc.publisherMeđunarodni Institut za nauku o sinterovanju, Beograd
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35002/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34006/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceScience of Sintering
dc.subjectRaw basalten
dc.subjectSintered basalten
dc.subjectCavitation damagesen
dc.subjectMass lossen
dc.subjectImage analysisen
dc.titleThe Mechanisms of Cavitation Erosion of Raw and Sintered Basalten
dc.typearticle
dc.rights.licenseBY
dc.citation.epage419
dc.citation.issue4
dc.citation.other51(4): 409-419
dc.citation.rankM22
dc.citation.spage409
dc.citation.volume51
dc.identifier.doi10.2298/SOS1904409P
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/10053/0350-820X1904409P.pdf
dc.identifier.scopus2-s2.0-85078838624
dc.identifier.wos000509869400006
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу